When it has to be right | Leica Geosystems
User Guide for Leica models including: DSX Utility Detection Radar, DSX, Utility Detection Radar, Detection Radar, Radar
GEFOS Leica | Georadar Leica DSX - georadar na stavbu
File Info : application/pdf, 16 Pages, 1.29MB
DocumentDocumentLeica DSX Quick Guide Version 2.0 English 2 1 Intended use Important Information about your Instrument Important Information about your Instrument Read and follow the User Manual before using the product or the accessories delivered with the product. Keep for future reference! · Data communication with external appliances · Carrying out measurement tasks using various GNSS measuring techniques · Validating user-input utilities based on the processed data · Detecting and mapping underground utilities - metallic and nonmetallic · Generating project documentation and 3D map of underground utilities The product must not be disposed with household waste. 2 DSX DSX Components a b c d e f g 0019568_001 a Cradle for CT1000 tablet b Extendable handle c Handle extension knobs d Upper cam levers for foldable handle e Wheel lock for cart brake f Power button for the DSX g Front alignment marker on the carrying handle h h Battery compartment i Encoders placed inside the i rear wheels j j Bottom cam levers for the foldable handle k k Side alignment markers on the bottom chassis 3 DSX Components 4 3 Environmental specifications Technical Data Technical Data Temperature Operating temperature [°C] -10 to +40 GEB242: -10 to +55 Storage temperature [°C] -40 to +70 -40 to +70 Protection against water, dust and sand Protection IP65 (IEC 60529) Humidity Protection Max 95% non-condensing The effects of condensation are to be effectively counteracted by periodically drying out the instrument. 4 Care and Transport Transport in a road vehicle Never carry the product loose in a road vehicle, as it can be affected by shock and vibration. Always carry the product in its container and secure it. For products for which no container is available use the original packaging or its equivalent. Shipping When transporting the product by rail, air or sea, always use the complete original Leica Geosystems packaging, container and cardboard box, or its equivalent, to protect against shock and vibration. 5 Care and Transport 6 Operation 5 Operation 5.1 Unfolding and Adjusting the Handle Unfold and adjust 1 2 the handle 3 4 0019569_001 1. Release inner cam levers and unfold upper handle legs . 2. Lock inner cam levers until the visual markers are aligned. 3. Release outer cam levers and raise entire handle assembly until the visual markers are aligned. 4. Loosen the knobs to extend the upper handles, and then tighten them. 5.2 Attach and connect the tablet Attaching and Connecting the Laptop or Tablet The support is designed to hold a CT1000 tablet. 0019586_001 The support includes the tablet cradle to hold the tablet, two RAM balls (one attached to the cart handles and the other to the cradle). Also it includes a double socket arm which holds together the RAM balls. 7 Operation 8 Operation 0019587_001 1. Mount the two RAM balls to attach the tablet to the handle: · One to the handle top · The other to the tablet cradle 2. Use the double socket arm to hold the two RAM balls: Adjust the tablet cradle until optimal inclination and then tighten the screw on the double socket arm. 3. x0x0xx1x9x_603071_001 Plug in the DSX LAN cable to the tablet. 9 Operation 10 Operation 5.3 Inserting the Battery Insert the battery 1 2 3 0019570_002 1. 2. 3. To open the battery compartment, loosen the screw on the battery compartment. Insert the battery facing downwards. The rough surface of the battery points towards the up-down direction. Close the battery compartment and tighten the screw. 5.4 Switch the DSX device ON/OFF Switching the DSX ON/OFF 0xx0x1xx9x6_03071_001 1. Press the ON/OFF key on the DSX. 11 Operation 12 6 Conformity to European regulations EU Declaration of Conformity EU Declaration of Conformity The equipment conforms to the following requirements set by EC regulations, including subsequent modifications, and to the legislation set by the member states that implement these regulations: 2014/53/EU Radio Directive Warning: this equipment is destined for use in industrial environments (Class A apparatus). In residential, commercial and light industry environments, this apparatus may generate radio interference: in this case, the user may be required to operate while taking appropriate countermeasures. The apparatus is sensitive to the presence of external electromagnetic fields, which may reduce its performance. Receiver test according to EN 302 066 v. 2.1.0 The unit has been tested according to the provision of the EN 302 066 v. 2.1.0. Specifically, for the receiver test (that tests the influence of an interferer signal to the device), the following performance criterion has been used (see ETSI TS 103 361 v.1.1.1) . Performance criterion: The difference D between the Rx signal noise (increased by an interferer) and the maximum input signal for the Rx in the linear region of operation. Level of performance: Dmin > 30 dB EU Declaration of Conformity This corresponds to EN ISO/ IEC 170501 We, Leica Geosystems AG, CH-9435 Heerbrugg, declare under our sole responsibility that the product Leica DSX Ground Penetrating Radar following the provisions of Directive(s) · 2014/53/EU Radio equipment (RED) (in accordance with annex III) · 2011/65/EU Restriction of hazardous substances (RoHS) to which this declaration relates, is in compliance with the following standards: 13 EU Declaration of Conformity 14 EU Declaration of Conformity · EN 61010-1:2010 · EN 62479:2010 · EN 301 489-1 V2.2.0: 2017 · EN 301 489-33 V2.2.1: 2019 · EN 302 066 V2.1.1: 2017 · Draft EN 302 066 V2.2.0: 2019 For translations into the official EU languages please refer to: http://www.leica-geosystems.com/ce 900634-2.0.0en Original text (900634-2.0.0en) Printed in Switzerland, © 2021 Leica Geosystems AG Leica Geosystems AG Heinrich-Wild-Strasse 9435 Heerbrugg Switzerland www.leica-geosystems.com