Global Support Site - Star Micronics Global Support Center
User Guide for Star Micronics models including: BSC10E, BSC10E Fast Thermal Desktop Printer, Fast Thermal Desktop Printer, Thermal Desktop Printer, Desktop Printer, Printer
FAQ For BSC10 | Starmicronics Southeast Asia
File Info : application/pdf, 9 Pages, 895.67KB
DocumentDocumentHow to configuration BSC10E for printing 48 Character/Line and Darkest Font _____________________________________________________________________________________ **Connect printer through LAN Cable for get IP Address** 1. Download and Install Utility > http://www.starmicronics.com/support/ Select same as below 2. Click BSC10 Installation CD V2.1 for download 3. After download done, Go to that file and right click at "Autorun" and click "Run as administrator" How to configuration BSC10E for printing 48 Character/Line and Darkest Font 4. Click "Install" 5. Check "I Agree" then click "Next" 6. Click "Next" How to configuration BSC10E for printing 48 Character/Line and Darkest Font 7. Check I accept... then click "Next" 8. Click "Typical" 9. Click "Install" and waiting till finished How to configuration BSC10E for printing 48 Character/Line and Darkest Font 10. Click "Finish" 11. Open the program "Printer Utility BSC10" How to configuration BSC10E for printing 48 Character/Line and Darkest Font 12. Click "Ethernet > Search Network" and waiting till get IP Address then click "Done" 13. Click "OK" if do not want to change printer name 14. Click "OK" 15. Click "Printer Setting" and waiting till finished download current configuration How to configuration BSC10E for printing 48 Character/Line and Darkest Font 16. Setting at Paper Size to 80mm x Receipt (48 Columns) and Printer Density to +3 (Darkest) How to configuration BSC10E for printing 48 Character/Line and Darkest Font 17. Click "Store" for save configuration then click "OK" How to configuration BSC10E for printing 48 Character/Line and Darkest Font 18. Click "Printer Setting" for printing self-test of the printer (Should be same as next picture) How to configuration BSC10E for printing 48 Character/Line and Darkest Font