Instructions for TCP models including: WF216000, Smart Remote
File Info : application/pdf, 2 Pages, 2.16MB
DocumentDocumentWARNING NOTE: Please read the instructions before proceeding with the installation. The TCP Smart Remote is a Bluetooth Signal Mesh device that can be used to control any TCP SmartStuff device that is on its Mesh network. Functions such as On/Off, dimming, and group control can be done through the Smart Remote instead of using the TCP SmartStuff App. Regulatory Approvals · Contains FCC ID: NIR-MESH8269 · Contains IC: 9486A-MESH8269 Specifications Operating Voltage · 2 AAA batteries (not included) Network Protocol · Bluetooth Signal Mesh Communication Range · 150 ft / 46 m The "Android" name, the Android logo, Google Play and the Google Play logo are trademarks of Google LLC. Apple, the Apple logo, and the App Store are trademarks of Apple Inc., registered in the U.S. and other countries.The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by TCP is under license. SmartBox Remote Instructions Download the TCP SmartStuff App The TCP SmartStuff App is used to configure the Bluetooth® Signal Mesh and TCP SmartStuff devices. Download the TCP SmartStuff App from the following options: · Download the SmartStuff App from the Apple App Store® or Google Play StoreTM · Use the QR Codes here: Instructions for configuring TCP Smart App and SmartStuff devices are at www.tcpi.com/smartstuff/ Smart Remote Button Descriptions On Status Light Reduce CCT Group Select Group 1 On Group 1 Off Group 2 On Group 2 Off Off Increase Brightness Increase CCT Reduce Brightness Group 4 On Group 4 Off Group 3 On Group 3 Off Smart Remote Button Instructions ON : Turns on all TCP SmartStuff devices connected to the APP. OFF : Turns off all TCP SmartStuff devices connected to the APP. Increase Brightness: Increases the brightness of the TCP SmartStuff devices on a network or an individual group. Decrease Brightness: Decreases the brightness of the TCP SmartStuff devices on a network or an individual group. Increase CCT*: Increases the color temperature of the TCP SmartStuff devices on a network or an individual group. Decrease CCT*: Decreases the color temperature of the TCP SmartStuff devices on a network or an individual group. * TCP SmartStuff devices must be capable of changing its color temperature for the buttons to work Group Buttons Group (1, 2, 3, 4) Group (1, 2, 3, 4) On: Turns on all TCP SmartStuff devices connected to the APP. Group (1, 2, 3, 4) Off: Turns off all TCP SmartStuff devices connected to the APP. Group (1, 2, 3, 4) Select: Selects the corresponding group. Switching Between Groups Pressing on Group On, Group Off, or Group Select buttons will enable the Smart Remote to control the corresponding group. Pressing the CCT or Brightness buttons will affect the TCP SmartStuff devices in that group only. To change the Smart Remote to control all the SmartStuff devices, press either ON or OFF. Setting up the Groups must be done through the TCP SmartStuff App. Mounting the Smart Remote to a Wall HARDWARE NEEDED ·Electric Drill ·Philips Screw (size needed) ·Drywall Anchor (size needed) ·Ruler ·Pencil 1. Remove the Mounting Base from the Smart Remote. 2. Choose desired location of the Mounting Base. 3. Use a pencil to place a mark on the wall where each Drywall Anchor will go. 4. Drill holes. 5. Place Drywall Anchor in wall. 6. Place Mounting Anchor on wall and screw in.Adobe PDF library 15.00 Adobe Illustrator(R) 24.0