Roll & Hill
Instruction Manual for Roll Hill models including: Modo Sconce - 2 Globe Wall Lamp, Sconce - 2 Globe Wall Lamp, 2 Globe Wall Lamp, Globe Wall Lamp, Wall Lamp, Lamp
Modo – Roll & Hill Spec Sheet
Modo | Sconce - 2 Globes | Jason Miller – Roll & Hill
File Info : application/pdf, 3 Pages, 163.65KB
DocumentDocumentCONTENTS Modo Sconce - 2 Globe Globes (2) T +1 718 387 6132 www.rollandhill.com Crossbar Bulbs (2) 120V LED G25 E26 (bulbs included) 240V LED G25 E27 (bulbs included) 8/32 Junction Box Screws Wago Connector (2) (x2) Long 8-32 screw On 240V fixtures only (x2) Toggle anchor On 240V fixtures only (x2) Wood screw On 240V fixtures only (x2) Metal screw On 240V fixtures only SAFETY INFORMATION Only one light bulb per socket. Only suitable for direct mounting on non-combustible surfaces. Under no circumstances can Modo Sconce be mounted on normally flammable surfaces. Suitable for dry, indoor use only. Maximum ambient temperatures: 25° C Updated 06JAN2023 1 T +1 718 387 6132 www.rollandhill.com WALL INSTALLATION | MODO SCONCE - 2 GLOBE Note: Please contact a licensed electrician. Note: Do not use bulbs that exceed 25 watts. 1. Attach custom crossbar (A) from the back of the fixture onto the juntion box using provided #8-32 screws (B). Level the crossbar so that two of the holes are horizontal. Pull electrical wires out through the crossbar. 2. Trim excess wire and make electrical connections from junction box to sconce (C). For 240V, connect the copper ground wire from fixture to green ground wire (E). Push the connected wires back through the center hole of the crossbar. 3. Fit the fixture over the crossbar and secure in place with provided 8-32 screws into the crossbar (D). A B Updated 06JAN2023 D C E 02 T +1 718 387 6132 www.rollandhill.com INSTALLATION | ATTACHING MODO GLOBES 1. Sandwich the glass globe (A) around the socket fitter (B) and cap (C). Gently tighten the sleeve (D) to hold the globe in place. D C B A Updated 06JAN2023 3