IKEA BRIMNES Bed Frame Assembly Instructions

Step 1: Part Identification

Identify all parts and hardware before beginning assembly. Refer to the provided diagrams for part numbers and quantities.

Hardware included:

• 2x Part 110115
• 10x Part 118331
• 4x Part 101359
• 8x Part 101350
• 8x Part 101345
• 6x Part 102138
• 12x Part 100365
• 20x Part 100049
• 4x Part 114671
• 14x Part 110630
• 12x Part 110646
• 6x Part 122628
• 1x Part 100049

Other components:

• 6x Component with part number 122628
• 1x Allen key with part number 100049

Step 2: Prepare the Base

Lay out the main base components on a protected surface. Ensure you have adequate space for assembly.

Important: Do not overtighten screws. Follow the diagrams carefully to ensure correct orientation of parts.

Step 3: Assemble the Frame Structure

Begin by connecting the side panels and support beams using the provided hardware. Pay close attention to the alignment of pre-drilled holes.

Note: Some steps may require two people for safe and proper assembly. ?‍?‍?

Step 4: Install Drawer Slides

Attach the drawer slides to the designated positions on the frame. Ensure they are level and parallel.

Diagrams show:

• Attaching drawer slides (part 139505) using screws (part 100365).
• Correct and incorrect methods for attaching slides. ❌

Step 5: Construct the Drawer Boxes

Assemble the individual drawer boxes according to the diagrams, using the appropriate screws and dowels.

Step 6: Attach Drawer Fronts and Backs

Connect the drawer fronts and backs to the assembled drawer boxes. Ensure a snug fit.

Step 7: Insert Drawers into Frame

Carefully slide the assembled drawers into the frame, ensuring they move smoothly on the installed slides.

Step 8: Attach Bed Slats

Place the bed slats onto the designated supports within the frame. Ensure they are evenly spaced.

Diagrams show:

• Attaching slats using screws (part 105163) and dowels (part 191315).
• Correct placement of slats. ✔️

Step 9: Final Checks

Review all connections to ensure they are secure. Check that the drawers open and close properly. Ensure the bed frame is stable.

Warning: Do not place heavy objects on the frame during assembly. ⚠️

Step 10: Mattress Placement

Place your mattress on the assembled bed frame. Ensure it fits correctly and does not overhang the edges.

Step 11: Drawer Assembly (Continued)

Further steps involve attaching drawer components and ensuring smooth operation.

Specific steps include:

• Attaching components with screws (e.g., 110789, 105163).
• Using cam locks (e.g., 100049) for secure connections.

Step 12: Attaching Side Supports

Attach side support pieces using screws (e.g., 117327, 117228) as shown in the diagrams.

Step 13: Securing the Structure

Final assembly steps involve securing the main structure with various screws and connectors.

Examples:

• Using screws (110519) and dowels (118331).
• Using cam locks (100049) and screws (110630).

Step 14: Drawer Front Attachment

Attach the drawer fronts to the assembled drawer boxes, ensuring proper alignment.

Step 15: Final Drawer Assembly

Complete the drawer assembly by attaching any remaining components and ensuring smooth operation.

Specific hardware used:

• Screws (100365)
• Connectors (101359)

Step 16: Final Bed Frame Assembly

Complete the assembly of the bed frame by attaching the final components, ensuring all parts are securely fastened.

Hardware used in final steps:

• Screws (100359)
• Connectors (118301)

Step 17: Drawer Insertion and Operation

Insert the completed drawers into the frame and test their functionality.

Step 18: Final Touches

Ensure all screws are tightened and the bed frame is stable and ready for use.