UniFi Protect G3 mini Datasheet
Ubiquiti UniFi Protect G3 mini Camera
Product Overview
The UniFi Protect G3 mini delivers a sharp 1080p Full HD video over dual-band Wi-Fi in a compact form factor. Automatic, integrated IR LEDs provide clear video footage for nighttime surveillance. The G3 mini with two-way audio is conveniently powered by the included AC power adapter, or use an Instant 802.3af PoE to USB adapter (not included). Quickly adapt the camera via Wi-Fi or Bluetooth from the UniFi Protect mobile app for integration into your existing network.
Image Description: The UniFi Protect G3 mini is a compact, white, dome-shaped security camera with a wide-angle lens. It is shown alongside a tablet displaying the UniFi Protect software interface, which presents a grid of live video feeds from multiple cameras, illustrating the system's multi-camera management capability.
Mechanical Specifications
| Property | Value |
|---|---|
| Dimensions | 74 x 44 x 43 mm (2.91 x 1.73 x 1.69") |
| Weight | Without Mount: 78 g (2.75 oz) With Mount: 92 g (3.25 oz) |
| Enclosure Material | Polycarbonate |
| Mount Material | Polycarbonate |
Optics
| Property | Value |
|---|---|
| Sensor | 2 MP CMOS Sensor |
| Lens | EFL 2.8 mm, f/2.0 |
| View Angle | H: 111.3°, V: 58.9°, D: 133.6° |
| Night Mode | Built-in IR LED Illumination and IR Cut Filter |
Video Specifications
| Property | Value |
|---|---|
| Compression | H.264/MJPEG |
| Resolution | 1080p FHD (1920 x 1080/16:9) |
| Maximum Frame Rate | 30 FPS |
| Image Settings | Color, Brightness, Sharpness, Contrast, White Balance, Exposure Control, 2DNR, 3DNR, NR by Motion, Masking, Text Overlay |
System Specifications
| Property | Value |
|---|---|
| Processor Specs | ARM Cortex-A7 |
| Memory Information | 2 Gb DDR3 |
| Management Interface | UniFi Protect |
| Networking Interface | 802.11 a/b/g/n/ac Wi-Fi, Bluetooth 5.0 |
| Flash Memory Support | 1 Gb |
| Max. Power Consumption | 5W |
| Power Supply | 5V, 2A USB Power Adapter (Kits Included) Instant 802.3af PoE to USB Adaptor (Not Included) |
| Supported Voltage Range | DC 5V, 2A |
| Link/Activity LED | Yes |
| Button | Factory Reset |
| Mounting | Wall Mount Accessory (Kits Included) |
| Operating Temperature | 0 to 40° C (32 to 104° F) |
| Operating Humidity | 0 to 90% Noncondensing |
Audio Specifications
| Property | Value |
|---|---|
| Microphone | Yes (Can be Disabled in Software) |
| Speaker | Yes |
Software
| Property | Value |
|---|---|
| Controller Software | UniFi Protect |
| Mobile Apps | UniFi Protect iOS and Android |
Certifications
- FCC
- IC
- CE
Compliance Information
FCC Compliance
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This equipment complies with radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Declaration on radiation exposure: This equipment complies with the limits set for radiation exposure in an uncontrolled environment. During installation and operation, ensure a minimum distance of 20 cm between the radiating element and yourself. This transmitter must not be installed near any other antenna or transmitter, and must not be used in conjunction with any other of these devices.
Ubiquiti - Warranty
