Assembly Instructions: 2-Drawer Filing Cabinet (Model 1010)

Product Overview

This document provides assembly instructions for a two-drawer filing cabinet, model number 1010. The cabinet is designed for office or home use to help organize documents and supplies. It features two drawers and is equipped with wheels for mobility, with an option to secure it to a wall for stability.

Visual Description: The product is a two-drawer filing cabinet, depicted in line drawings. It has a rectangular body, two drawers with handles, and sits on four wheels.

Accessories and Parts List

Assembly Instructions

Step 1: Attach Kick Plates

Insert the front kick plate (3) and back kick plate (4) into the bottom edges of the left side panel (1) and right side panel (2).

Visual Description: Shows the two main side panels standing upright, with the narrow kick plates being slotted into the bottom. Close-up views illustrate the connection points.

Step 2: Install Gaskets and Base Screws

Fix the 4 gaskets (C) at the bottom of the cabinet structure using 16 screws (A).

Visual Description: The partially assembled cabinet frame is shown. Gaskets (C) are positioned at the bottom corners, and screws (A) are used to secure them to the frame. A callout indicates the quantities: 16 screws (A) and 4 gaskets (C).

Step 3: Install Back Panel

Install the back panel (6) using 6 screws (A).

Visual Description: The cabinet frame is shown from the back. The back panel (6) is aligned and attached with screws (A). Close-up views show the screw insertion points. A callout indicates the quantity: 6 screws (A).

Step 4: Install Top Panel

Install the top panel (5). Attention: Make sure the cabinet is unlocked as shown before installing the top panel.

Visual Description: The top panel (5) is shown being placed onto the cabinet frame. An illustration depicts a key inserted into a lock on the top panel, with a checkmark (✔️) indicating the unlocked state and a cross (❌) indicating the locked state.

Step 5: Secure Top Panel

Fix the top panel (5) with 6 screws (A).

Visual Description: Screws (A) are shown being driven from the inside of the cabinet to secure the top panel (5). A callout indicates the quantity: 6 screws (A).

Step 6: Wall Anchoring (Anti-Tipping)

Fix the cabinet to the wall using the expansion screw (D) to prevent tipping.

Visual Description: The assembled cabinet is shown. An expansion screw (D) is illustrated being used to anchor the cabinet to a wall. A callout indicates the quantity: 1 expansion screw (D).

Step 7: Attach Drawer Card Slots

Install the card slots (B) onto the drawer front panels (11).

Visual Description: Drawer front panels (11) are shown. Card slots (B) are being attached to designated areas. A note indicates that "The small pieces need to be folded". A callout indicates the quantity: 2 card slots (B).

Step 8: Assemble Drawer Sides to Front

For each drawer, connect the drawer side panels (7, 8) to the drawer front panel (11) using 4 screws (A) per drawer.

Visual Description: The drawer front panel (11) is shown being joined with the left drawer side panel (7) and right drawer side panel (8). Screws (A) are used for this connection. A callout indicates the total quantity for two drawers: 8 screws (A).

Step 9: Install Drawer Bottom Panel

Install the drawer bottom panel (9) as shown. Pay attention to the direction.

Visual Description: The partially assembled drawer frame is shown. The drawer bottom panel (9) is being slid into grooves. Close-up views highlight the correct orientation and fit.

Step 10: Attach Drawer Slide Brackets

Install the slide brackets (12, 13) at the bottom of the drawers.

Visual Description: The assembled drawer is shown. Slide brackets (12, 13) are attached to the bottom edges. Screws (A) are used for attachment. A callout indicates the quantity: 12 screws (A) (6 per drawer).

Step 11: Connect Drawer Back Panels

Connect the drawer back panels (10) to the drawer assembly.

Visual Description: The drawer assembly is shown. Drawer back panels (10) are attached to the rear of the drawer. Close-up views illustrate the connection method.

Step 12: Install Hanging Bars

Install the hanging bars (14). Pay attention to the direction.

Visual Description: The assembled drawer is shown. Hanging bars (14) are attached to the inside of the drawer sides, intended for suspending files.

Step 13: Insert Drawers into Cabinet

Install the assembled drawers into the cabinet.

Visual Description: The assembled drawers are shown being slid into the cabinet. The cabinet is depicted with its feet.

Tips: If the ground is uneven, you can rotate the feet to adjust the height.

Step 14: Replace Feet with Wheels (Optional)

If you need to move the cabinet frequently, you can choose to replace the feet with wheels. You can remove the feet by rotating them counterclockwise (↩️), then install the wheels (⚙️).

Visual Description: The bottom of the cabinet is shown with feet. An illustration shows a foot being rotated counterclockwise to remove it. A wheel is then shown being attached. The text "or" separates the foot removal from wheel installation.

Important Notes

CAUTION: An assistant is required for assembly.

If there is any problem during assembly, please contact the customer service team. If there is any slight dent or damage, you can try to fix it by pliers (?) or hammers (?).