2 in. x 4 in. x 8 ft. Prime Stud 058449 - The Home DepotRYOBI ONE+ HP 18V Brushless Cordless 1/2 in. Drill/Driver (Tool Only) PBLDD01B - The Home DepotWeaber 1 in. x 2 in. x Random Length S4S Oak Hardwood Board 22050 - The Home Depot
Owner's Manual for RYOBI models including: Engraved Teacher s Name Plate, Teacher s Name Plate, Name Plate, Plate
File Info : application/pdf, 2 Pages, 168.65KB
DocumentDocumentEngraved Teacher's Name Plate PROJECT PLANS Skill Level: Beginner Materials Item 1"x4"x6' Piece of Wood 1"x2"x2' Piece of Wood Transfer Paper Wood Stain or Paint 1" Wood Screws Toolbox Project Plans: Engraved Teacher Name Plate Qty 1 1 1 1 1 18V ONE+ Rotary Tool Station 16 PC Carving and Engraving Kit 25 FT. Tape Measure 18V ONE+ HP BRUSHLESS 1/2" Drill/Driver 65PC Drill and Drive Bit Set Project Instructions Step 1 Cut the larger and smaller pieces of wood to 10." Sand the wood in preparation for staining. Step 2 Stain or paint the wood. Allow time for it to dry. Step 3 Apply a thick layer of chalk on the backside of the template, then tape the template onto the wood. Trace over the template with a pencil, then peel off the template. Step 4 Use a Ball Engraving Burr to engrave all of the letters into the wood plaque. Step 5 Drill pilot holes on both ends of the small piece of wood using a 5/32" drill bit. Attach the small piece of wood on the bottom of the nameplate using wood screws. 2