User Manual for wemorii models including: WM-1BH Aroma Diffuser, WM-1BH, Aroma Diffuser, Diffuser
Bio Creative Labs WM-1BH Aroma Diffuser 2BAJGWM-1BH 2BAJGWM1BH wm 1bh
File Info : application/pdf, 1 Pages, 115.39KB
DocumentDocumentOutput Mist Mount WM-1BH Aroma Diffuser User Manual DC24V 0.65A 20~30ml/H Power Applicant Area 10W Approx.30 Square Meter Mist Woking Time 12~20H Vibration frequency of the atomization 2.4 M HZ Water Tank Fan Product Size Essential Oil Bottle 380ml 12V 4010 DC 168*171*198mm 3 bottles LED Beads Noise Main Material Control Options 6pcs 36db PP APP + Physical buttons Functions: Power ButtonPress the first time, the diffuser machine with 7 led changling color,and the power button indicator is green. All the power supply will be ready to power on, press it again to turn off all the power supply. WIFI Button: Long press wifi button for 2 seconds to enter WIFI common network configuraion mode, the wifi indicator light will be blue fast flashing. Press 2 seconds again, it will enter compatibility mode, and the WIFI indicator light is blue flashing, the effective time of distribution network is 10 minutes, and it will automatically exit after 10 mintues. If the network is connected, the light will be blue. Mist Button: Press the first time for small level mist,and the indicator is green, Press the second time for large mist, and the indicator is yellow, Press the third time to turn off the spray, and cycle in turn. Essential Oil Button: When the device is first powered on or the machine is not spraying, the corresponding pump will drip 5 drops of essential oil. If no essential oil in the bottles, the light on the coressponding button will flash red. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ·Reorient or relocate the receiving antenna. ·Increase the separation between the equipment and receiver. ·Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ·Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Information This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.