Miele CVA 7845 - Brilliant White
24" Built-In Coffee Machine With DirectWater - VitroLine
Features
- M-Touch Display - Simple to use touch controls
- WifiConn@ct - Monitor appliances from your mobile device
- Coffee Select - choose between up to 3 different bean varieties
- AutoClean and AutoDescale - run most maintenance programs automatically
Material Number
11754260
Specifications
| Specification | Details |
|---|---|
| Overall Unit Dimensions | 23 7/16" (595 mm) W x 17 15/16" (477 mm) H x 19 5/8" (498 mm) D [including water connection] |
| Niche | |
| Minimum Cabinet Niche Opening | 22 1/8" (562 mm) W x 17 11/16" (450 mm) H x 24" (610 mm) D |
| Plumbing | |
| Water Supply Requirements | Connect to a cold water supply only. Must be connected to a shut-off valve. The water shut-off valve must be accessible after installation. Water pressure must be between 14.5 psi (1 bar) and may not exceed 145 psi (10 bar). If pressure is higher than 145 psi (10 bar), a pressure reducing valve must be installed. |
| Water Connection Line | 3/4" BSP to 1/4" Compression fitting is supplied. Suitable 1/4" O.D flexible water line or copper piping is not supplied. Maximum water line length 4'11" (1.5 m). |
| Electrical | |
| Electrical Requirements | 120V, 60Hz, 15 Amps |
| Power Cord | NEMA 5-15 plug, 6 ft (1.8 m) |
| Shipping | |
| Shipping Weight | 65 lbs (29.4 kg) |
| Shipping Dimensions | 22 1/16" (560 mm) W x 22 1/16" (560 mm) H x 25 3/16" (640 mm) D |
Product Dimensions
Product Dimensions Diagram:
Front View: Shows the appliance unit with a width of 23 7/16 inches (595 mm) and a height of 17 15/16 inches (455.5 mm).
Side View: Shows the appliance unit with a depth of 19 5/8 inches (498 mm). It also illustrates the required niche dimensions: width of 23 7/16 inches (595 mm), height of 17 15/16 inches (455.5 mm), and depth of 17 1/2 inches (444 mm). Additional internal dimensions are shown: 12 7/8 inches (327 mm), 4 5/16 inches (110 mm), and 4 inches (102 mm).
Flush Cutout Dimensions
Flush Cutout Dimensions Diagram:
Front View: Depicts the cabinet opening required for flush installation. The opening width is 22 1/8 inches (562 mm) and the height is 17 11/16 inches (450 mm). The overall cabinet width requirement is 24 15/16 inches (≥633 mm).
Side View: Shows the required cabinet depth for flush installation as 19 5/8 inches (498 mm). It also indicates clearances of 1/8 inch (3 mm) and 3/8 inch (9.5 mm).
Cutout A Description: A cut-out of 4 inches x 28 inches (100 mm x 720 mm) is needed in the bottom of the cabinet for the power cord and ventilation. Electrical and water supplies are recommended to be placed in adjacent cabinetry. Additional cabinet depth is required if supplies are placed behind the appliance.
Proud Cutout Dimensions
Proud Cutout Dimensions Diagram:
Front View: Depicts the cabinet opening required for proud installation. The opening width is 22 1/8 inches (562 mm) and the height is 17 11/16 inches (450 mm). The overall cabinet width requirement is 24 inches (≥610 mm).
Side View: Shows the required cabinet depth for proud installation as 19 5/8 inches (498 mm). It also indicates clearances of 1/8 inch (3 mm) and 3/8 inch (9.5 mm).
Cutout A Description: A cut-out of 4 inches x 28 inches (100 mm x 720 mm) is needed in the bottom of the cabinet for the power cord and ventilation. Electrical and water supplies are recommended to be placed in adjacent cabinetry. Additional cabinet depth is required if supplies are placed behind the appliance.
