PowerColor ALPHYN AH10 Wireless Gaming Headset
User Manual
Package Contents
- 1. AH10 Wireless Headset
- 2. Type-C Transmitter
- 3. Type-C to Type-C Adaptor
- 4. Type-A to Type-C Adaptor
- 5. Type-C to Type-A Charging Cable
- 6. 3.5 mm Audio Cable
- 7. Microphone Foam Cover
- 8. Carry Pouch
Specifications
Headphone
| Model No | ALPHYN AH10 |
| Driver Diameter | 50 mm |
| Inner Ear Cup Diameter | 47 mm |
| Connection Type | Type-C Wireless (2.4GHz), 3.5 mm |
| Cable Length | 1.2 mm |
| Sensitivity | 98 ± 3 dB |
| Impedance | 32 Ω ± 15 % |
| Frequency Response | 20 Hz - 20 kHz |
| Approximate Weight | 326 g |
| Rechargeable Battery | 1500 mAh / 3.7 V |
| Charging Time | ≤ 2.5 hours |
| Battery life | Up to 30 hours |
Retractable Microphone
| Frequency Response | 100 Hz – 10 kHz |
| Impedance | 2.2 KΩ |
| Sensitivity | -44 dB |
| Pickup Pattern | Bi-Directional |
Requirements
- Windows 10 or higher
- 3.5 mm audio devices
- USB 2.0 Port: Type-A, Type-C
Product Overview
The headset features the following components:
- A: Adjustable headband
- B: Retractable Microphone
- C: Protein Leather Ear Pads with Memory Foam
- D: Status Indicator (LED)
- E: Charging Indicator (LED)
- F: Type-C Charging Port
- G: 3.5 mm audio port
Controls
Power Button/Audio Profiles Switcher/Pause and Play Button
- Press for 2 seconds [Power On/Off]: Blue LED blinking or "Power on" voice prompt indicates power on; Red LED blinking or "Power off" indicates power off.
- Double Click [Mode Switch]: Cycle through Gaming mode, Music mode, and Theater mode to switch sound effects.
- Click [Play/Pause]: Press once to pause and again to resume.
Microphone Mute Switch/ENC On/Off
- Press for 3 seconds [ENC On/Off]: Enable or disable Environmental Noise Cancellation (ENC).
- Click [Mic Mute]: Toggle microphone on or off.
Volume Control Knob
- Scroll upward: Volume +
- Scroll downward: Volume -
Connection Methods
2.4 GHz Wireless Connection
Steps:
- Insert the 2.4 GHz transmitter into the TYPE-C ports of your computer, phone, or other devices. The adapter will automatically start up, and the blue LED will flash to enter the pairing state.
- Turn on the headset. The headset and adapter will automatically connect successfully.
- After successful connection, the indicator light will flash blue every three seconds.
Notes:
- If pairing or connection is not successful within 1 minute, the transmitter enters standby mode until reconnected or powered off. In standby mode, the blue status indicator light flashes once per second.
- To re-pair if automatic pairing fails, press and hold the power button for about 4 seconds while the device is powered off.
Illustration: Shows the 2.4 GHz transmitter connected to a computer's USB-C port, and the headset connected wirelessly.
3.5mm Wired Connection
Insert the 3.5 mm audio cable into the headphone's audio jack and connect the other end to your computer, phone, or other devices.
Note: In 3.5 mm mode, the headphones enter a forced power-off state, rendering the microphone mute function inactive. Volume can still be adjusted using the Volume Control Knob, and charging is possible while in 3.5 mm mode.
Illustration: Shows the 3.5mm audio cable connected from the headset to a computer or mobile device.
Headset Charging Mode
Charging Process:
- When the headphone battery drops below 3.3V, a "Low Battery" voice prompt will occur every 3 minutes, and the red light will blink every second. When the battery level falls below 3.2V, the headset will automatically power off.
- Insert the USB Type-C charging cable to charge the headset. The headset will reset, automatically turn off, and enter charging mode. The red light indicates charging and turns off when fully charged.
Note: In charging mode, the headphones will forcibly power off but can still be used in 3.5 mm mode.
Illustration: Shows a USB Type-C cable connected to the headset's charging port and a power source (e.g., USB adapter), with indicators for 5V/1A and 2.5H charging time. Red light indicates charging.
Warranty
1-Year Limited Manufacturer Warranty. Warranty does not cover damages resulting from improper use.
Safety and Maintenance
- Do not take apart the device or operate it under abnormal current loads; any damage caused will void the warranty.
- Keep the device away from liquid, humidity, or moisture.
- Clean the device and connecting ports regularly with a soft cloth. Do not use soap.
Copyright and Legal Information
PowerColor is a registered trademark and/or trademark of Tul Corporation. All other registered trademarks and trademarks are property of their respective owners.
Importer Information
Company Name: TUL B.V.
Address: Antennestraat 31, 1322AH Almere, The Netherlands
Telephone: +31(0)36 785 3119
Email: bv_logistic@tul.com.tw
Manufacturer Information
Company Name: TUL Corporation
Address: 7F.-7, No.79, Sec. 1, Xintai 5th Rd., Xizhi Dist., New Taipei City 221, Taiwan
Telephone: +886-2-8698-3000
Website: www.powercolor.com
Regulatory and Compliance Information
FCC Compliance Statements
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure statement. The device can be used in portable exposure condition without restriction.
Compliance Marks: CE marking, UKCA marking, FCC logo.
PowerColor
