Installation Guide for mustard models including: M11046B, M11046B Sushi Mouse, Sushi Mouse, Mouse
Mustard London Ltd M11046B Sushi Mouse,Choco Mouse,Very Berry Mouse 2BKOO-M11046B 2BKOOM11046B m11046b
2.4G Optical Instruction Product Features 2.4G working frequency, strong versatility, transmission distance as far as 10 meters The use of the original phase of the high-end mainstream chip 3065, lower power consumption, the cursor is more stable, over-the-surface ability is stronger 800-1200-1600 three-gear hardware CPI switching function, press the CPI key of the mouse to switch the speed you like at will Use red LED as mobile tracing light source Multi-level power saving mode, maximum battery energy saving, and can completely shut down the power supply Ultra-miniature (Nano) receiver, plug and forget Product Use 1 Remove the wireless mouse and receiver from the box 2 Plug the ultra-micro (Nano) receiver into the USB interface of the host 3 Put 2PCS AA alkaline dry batteries into the mouse according to the correct polarity 4 After the LED light at the mouse is on, you can use the wireless mouse Advanced Product Features 1,CPI adjustment function This mouse has 800-1200-1600 three CPI adjustment. The default for power-on is 1200CPI. If you want to switch other speeds, press the CPI key to switch CPI, that is, you can switch between these three gears until you like the speed. 2. Customizable fourth and fifth key functions The fourth and fifth key functions on the side of this mouse are the default two functions of back/forward. If a specific driver is installed, dozens of functions can be customized. The driver is available on the CD (if a CD is available) or can be downloaded from a designated website. After installation, you can choose dozens of custom functions 3, automatic sleep and complete shutdown function If you do not use the mouse for 10 minutes, the mouse will enter the shutdown state of automatic hibernation in order to save power. Reboot use You just press any key at will. If you turn off the computer, or unplug the receiver, just press a button or move the mouse, you can enter the hibernation state of shutdown. Reminder: Please remove the battery for a long time without using the mouse to avoid corrosion of the machine parts 4, receiver collection function This mouse uses ultra-miniature (Nano) receiver, usually can be placed on the USB port of PC or Notebook for a long time, without any influence on the computer. If you want to go out or collect the mouse alone, you can put the receiver inside the mouse for convenient storage and easy to carry out to avoid omission. Reconnect Wireless mouse transmission and reception is an automatic locking identification code, which is convenient for a pair of 1 when multiple groups of mice are used. At high temperature, high magnetic field or when the receiver is dialed out, the automatic code will disappear when the mouse is powered off, and it needs to be reconnected before it can be used. 1. Re-insert the receiver 2. Reload the battery with the mouse 50CM away from the receiver and press any key to connect successfully. 3, the code is successful, you can use the wireless mouse again Precautions This mouse uses 2.4GHz radio waves to transmit data, and the line of sight distance is 10 meters. If there are large obstacles, the environmental interference distance will be reduced On the uneven, reflective desktop may affect the use of the mouse Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.Microsoft Word 2019