Instructions for Lifebuoy models including: BCPU1, 2AOXNBCPU1, BCONE BCPU1 Pool Unit, BCONE, BCONE BCPU1 Pool Unit, Pool Unit
Lifebuoy Ltd. BCPU1 Pool Unit of Pool alarm system 2AOXNBCPU1 2AOXNBCPU1 bcpu1
HOME SAFETY INTRODUCTION GETTING STARTED OPERATION SERVICE MULTI BCONE OPERATION When multiple Pool Units are paired with one Home Unit, the Pool Unit must be selected before an operation mode is set. The Select Device button alternates between the multiple Pool Units. The LEDs indicate the Pool Unit that is currently selected. Press the Select Device button to light the LED of the relevant Pool Unit (i.e. press once to select the first Pool Unit, press twice to select the second Pool Unit, and so on). MULTI BCONE 1 4 2 3 After selecting a Pool Unit, one of the operation mode LEDs lights up for a few seconds to indicate the current operation mode. To change the Operation Mode for the selected Pool Unit, see operation Modes. 29. The Home Unit icons indicate current issues related to one or more of the Pool Units The Swim Mode button LED blinks if at least one of the Pool Units is in Swim mode The On button LEDs indicate which of the Pool Units are in On mode BCone | Installation & Operation Guide Rev B | Doc P/N: BC-00-70-002 THANK YOU! Make Your Pool Safer Yuvalim Business Campus, Ness Ziona, Israel info@lifebuoyalarm.com www.lifebuoyalarm.com Copyright © 2021-2022 Lifebuoy, all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical or otherwise without prior written permission of Lifebuoy. Rev B | Doc P/N: BC-00-70-002Adobe PDF Library 15.0 Adobe InDesign 16.0 (Windows)