Instruction Manual for JY-JUYAO models including: JY-25, LCD Display Audio Play Time Control Board Countdown Timer Board
Summary. Input Voltage. DC12V. Power consumption. 220MA. Max current. 15A. Output switch control, no voltage output. Language. English, ESP, Chinese.
Summary. DC12V 220MA 15A switch control, no voltage output English, ESP, Chinese (1) Balance (2) Remaining time 1-3 types for choose (1) First use pay and time, and continue use pay and time (2)...
Input Voltage Power consumption Max current Output Language Standby display Working Mode Setting Operational time setting Inbuilt counter 5V output indication Summary DC12V 220MA 15A switch control, no voltage output English, ESP, Chinese (1) Balance (2) Remaining time 1-3 types for choose (1) First use pay and time, and continue use pay and time (2) Set pay and time (1) Delay time start, (2) delay time end (3) warning time 8 digits inbuilt counter per input Output 5V to indicate timing Working Mode Mode 1-1: pay and work immediately (1) First use Payrun first use time, and channel 1 device workcontinue use pay add continue use timetime's updevice stop working. (2) Push a Button Set 1/2/3payreach the valuerun the time, and machine works push the push button again add the time Mode 1-2: paydeposit to balancepush button startrun time and machine works (1) First use Paypush the button STARTrun first use time, and machine works continue use paydeposit to balancepush the button START add continue use timetime's updevice stop working. (2) Push a Button Set 1/2/3payreach the valuepush button STARTrun the time, and machine workspush the push button START againadd the time Note: If SET PAY and TIME on Mode 1-1 and 1-2 is using: 1. Choose 1 of Set 1, Set 2, Set 3 only to work at the same time 2. Free to add time on the working setting 3. Deposit to balance if total pay is not enough. Mode 2: Free to choose 1 of 3 machines to use. Machines can not work at the same time. PayDeposit to balancePush a Button Set 1/2/3payreach the valuerun the time, and machine workspush the push button START againadd the time Note: 1. Set 1 for Machine 1, Set 2 for Machine 2, Set 3 for Machine 3 2. Only 1 device work at the same time 3. Accumulated time for the machine is working 4. Free to use other machine after time runs out. Page.1 Optional Function Audio play: upload MP3 file on self prepare TF card plug into card slot play timing: 1. pay 2. start working 3. warning time 4. stop working Note: 1. upload file one by one on TF card to indicate 1-4. 2. Max play time per file: in 1 minute 3. it switches to next file if one file is playing audio and it is time to play next file. 4. If there is timing that is not needed to play, please upload silent sound file to instead Warning sign: connect beep. It beeps during warning time. Memory: (1) with Memory: continue working if power off and on (2) without Memory: standby if power off and on Back to standby automatically: if user has no action in setting time after inserting coins or pausing, it back to standby automatically. Delay START: delay starting before Delay End: delay stopping working after time runs out Connector No. Please follow this picture and following table on next page to connect wires Page.2 Connector Descrption 1: Display 2:Mode1-1 and Mode1-2: Select Button Set 1 Mode 2: button START for Channel 1 3:Mode1-1 and Mode1-2: Select Button Set 2 Mode 2: button START for Channel 2 4:Mode1-1 and Mode1-2: Select Button Set 3 Mode 2: button START for Channel 3 5:Mode1-1 and Mode 2: no use Mode1-2: button START 7: Button refund for connector 8 8: refund signal: Gnd, signal, DC12V 9: Input 3 10: Input 2 11: Input 1 12: DC12V power input: DC Jack 5.5*2.5mm 13:DC12V power input: connect wire 14: Output: switch control-Channel 1 15: Output: switch control-Channel 2 16: Output: switch control-Channel 3 17-22: output DC+5V 17: warning time 18/19: running time 20: delay time 21: time runs out 22: time start running 23: Setting button 24: TF card slot 25/26: For speaker 4 ohm 5watt 27: output sound source 28: volume adjustment for 25 and 26 29: Beep connector Note: (1) Free to choose 1 of 12 and 13 connecting to power (2) Free to choose 1 of 25 and 26 connecting to speaker (3) wire for 27 is not enclosed Connector Define 2/3/4/5/6/7 8 9/10/11 13 14/15/16 1: DC+5V (Red) 2: GND(Black) 3: Signal (White) 1: GND(Black) 2: Signal (White) 3: DC+12V (Red) 1: DC+12V (Red) 2: Signal (White) 3: GND(Black) 1: GND(Black) (1) Control N / 2: DC+12V (Red) (2) L / + to power 17/18/19/20/21 29 25 26 27 1: DC+5V (Red) 1: GND(Black) 1: - 1: + 2: GND(Black) 2: DC+5V (Red) 2: + 2: - Page.3 1: Sound L 2: GND 3: Sound R Setting Please use Connector No. 23 and follow following table to set up: 1. Enter to Main menu: Press "SET" when standby 2. Enter to Sub-menu: Press "UP" or "DN" to select on Main menuPress " SET" to enter 3. Press "UP" or "DN" to adjust value and settingPress "BACK" to save and back to Main menu When you set up time, Icon "^^" on the bottom indicates the one you are selecting Press " SET" to switch 4. Finish adjustment: Press "BACK" to save and back to previous screen show 5. Check income: Press "C"input 1 income showsPress "C"input 2 income shows Press "C"input 3 income shows 6. Reset counter: Hold on "C" for 3 secondsReset current input No. Record Note: input income is reset separately Main menu Language Mode Price-1 Time-1 Price-2 Time-2 Warning Back standby Memory Display and Setting specification Sub-menu Main menu English / ESP / Chinese Delay Start Mode 1-1 / Mode1-1 / Mode2 Delay End 1-200 SET-P1 1S - 30H:59M:59S SET-T1 1-200 SET-P2 1S - 30H:59M:59S SET-T2 0S-6M SET-P3 1M-30M SET-T3 With memory / Without memory Sub-menu 0S-6M 0S-6M 1-200 1S - 30H:59M:59S 1-200 1S - 30H:59M:59S 1-200 1S - 30H:59M:59S Page.4Adobe PDF Library 15.0