TONGOU TO-Q-SY2-JWM Smart Switch with Tasmota
Product Overview and Setup Guide
Product Description
Tasmota is a non-commercial product offering limited support. Users are expected to conduct their own research and resolve potential issues independently. Detailed information regarding connection, settings adjustments, and modifications is available on the website: tasmota.github.io/docs/.
Button Functions
- 1x Short Press: Toggles the switch state.
- 6x Short Press (three presses per second): Activates the device's temporary Hotspot configuration mode.
- 9x Short Press (three presses per second): Deletes existing configuration data and restarts the device, automatically entering configuration mode.
- Hold for 40 seconds: Restores the device to factory settings.
Connection Guide
- Plug in the device.
- Search for an available Wi-Fi hotspot named "tongou".
- Connect to the hotspot and open your web browser. Navigate to the address
192.168.4.1. - Enter your Wi-Fi network name (SSID) and password.
- After confirming the network information, the device's IP address will be displayed. It is recommended to note this IP address for future access.
- Once the network information is saved, the browser will automatically redirect to the device's IP address.
- The switch is now ready for use.
Device Overview
The TONGOU TO-Q-SY2-JWM Smart Switch, equipped with pre-installed Tasmota Open-Source Software, enables automatic and manual control of electrical devices within a room via remote access over a Wi-Fi network. This control can be managed from a smartphone or PC through a web interface. Communication with the switch is facilitated by a Wi-Fi network using a wireless adapter. The switch features a mechanical button and a status indicator. Additionally, the device incorporates an electromechanical relay and supports the Matter protocol.
