Sharkoon VK2 RGB ATX PC Case
The VK2 RGB is an ATX case that is suitable for a wide range of gaming setups thanks to its spacious design, refined looks, and a side panel made of tempered glass. Four fans are already pre-installed for a strong airflow. This can be expanded to comprise up to eight fans or, for maximum performance, radiators with a size of up to 360 mm. There is also sufficient space for HDDs and SSDs as well as tidy cable management.
Features
-
GAMING DESIGN
With the subtly playful look of the front panel and a tempered-glass side panel, the VK2 RGB is ideal for many different kinds of gaming setup and perfectly blends into all kinds of surroundings.
-
EXPANDABLE AIRFLOW
Three 120 mm fans and one 120 mm RGB LED fan are already pre-installed in the VK2 RGB, but this can be easily expanded to up to eight fans. The areas of air intake are protected by dust filters.
-
WATER-COOLING SUPPORT
For demanding systems, and instead of fans, the VK2 can be equipped with a 240 mm or 280 mm radiator under the top panel and a 360 mm radiator behind the front panel.
-
SUFFICIENT SPACE FOR DATA STORAGE
Up to two 3.5" HDDs or four 2.5" SSDs can be conveniently installed in different locations inside the VK2 RGB.
-
CONNECTIONS NEAR THE FRONT
For peripheral devices, two fast USB 3.0 ports and a TRRS port for headsets are available on the top of the ATX case.
-
TIDY INSIDE
To keep the inside of the VK2 RGB orderly and tidy, the case is provided with a power supply tunnel as well as sufficient space for cable management.
Specifications
| Product Name | VK2 RGB |
| Form Factor | ATX |
| Expansion Slots | 7 |
| Interior Painting | |
| Tool-Free Devices Installation | |
| Cable Management System | |
| Side Panel | Tempered Glass |
| Dimensions (L x W x H) | 40.4 x 20.6 x 48.7 cm |
| Max. Drive Bays | 2 x 3.5" | 4 x 2.5" |
| I/O | USB 3.0 (Top): 2 | Audio (Top): TRRS |
| Fan Configuration - Front Panel | 3x 120 mm Fan (Pre-installed) or Radiator (Optional)* |
| Fan Configuration - Rear Panel | 1x 120 mm Addressable RGB LED PWM Fan (Pre-installed) |
| Fan Configuration - Top Panel | 2x 120 mm or 2x 140 mm Fan or Radiator (Optional) |
| Fan Configuration - Bottom Panel | 2x 120 mm Fan (Optional) |
| RGB Compatibility - Type | Addressable |
| RGB Compatibility - Ports | 4 |
| RGB Compatibility - Manual Control | 14 Modes |
| RGB Compatibility - Mainboard Compatibility | MSI Mystic Light Sync, ASUS Aura Sync, Gigabyte RGB Fusion Ready, ASRock Polychrome Sync |
| RGB Compatibility - RGB Pinout | 5V-D-coded-G |
| Compatibility - Mainboard | Mini-ITX, Micro-ATX, ATX |
| Compatibility - Max. Length Graphics Card | 35.0 / 37.5** cm |
| Compatibility - Max. Height CPU Cooler | 16.0 cm |
| Compatibility - Max. Length PSU | 21.0 cm |
| Compatibility - Max. Height Radiator incl. Fan (Front) | 5.7 cm |
| Compatibility - Max. Height Radiator incl. Fan (Top) | 5.7 cm |
| Package Contents | VK2 RGB, Accessory Set |
| EAN Code | VK2 RGB Black |
| EAN Code Value | 4044951041206 |
* Installation of a 360 mm radiator can conflict with installation of a 3.5" HDD
** Without front fan
