User Manual for APANTAC models including: KVM-1-UHD-Tx-POE, KVM-1-UHD-Rx-POE, KVM-SET-17 UHD KVM Extenders, KVM-SET-17, UHD KVM Extenders, KVM Extenders, Extenders
4K/UHD KVM Extenders (4K@60, 4:4:4) with POE
4K/UHD KVM Extenders (4K@60, 4:4:4) with POE
KVM-SET-17 USER MANUAL v.2
Overview
KVM-SET-17 can extend HDMI 2.0 UHD computer signals up to 100 meters with USB 2.0 over a single CAT6 cable.
Package Contents
§ 1 x KVM-1-UHD-Tx-POE (Transmitter) § 1 x KVM-1-UHD-Rx-POE (Receiver) § 1 x Power adapter DC48V with lock +2 x mounting plates
Features
n Supports 4K@60Hz(4:4:4) n Supports 1080P@120Hz n Supports HDCP 1.4/2.2/2.3 n HDMI loop through n Extends HDMI 2.0 signals up to 100 meters n Supports POE n Supports USB 2.0 n Supports 3D and CEC pass-through n Supports bi-directional RS-232 n Supports all frequency IR control n Supports LPCM, Dolby True HD and Dobly Digital audio
Specifications
Function
KVM-1-UHD-Tx-POE
KVM-1-UHD-Rx-POE
HDMI In Connectors
1 x HDMI Type A Female
HDMI Out Connectors 1 x HDMI Type A Female
1 x HDMI Type A Female
RJ45 Connectors
1 x RJ45 for HDBaseT
USB
SPDIF Input SPDIF Output RS-232 Connectors IR In/Out Audio In/Out DIP SW LED DC Jack Max Resolution Max Distance Weight Dimensions (LxWxH)
USB B x1, USB A x 2
USB-A-Type Female x 2
Toslink Jack x 1
Toslink Jack x 1
DB9 female
3.5 Stereo Jack x 1
3.5 Stereo Jack x 1
3 Pin x 1
4 in 1 LED x 1
48V
4K60Hz
100 meters
415g
405g
152 x 115 x 20 mm
FRONT VIEW (Transmitter)
1. USB 2.0 (USB Device)
2. USB 2.0 (USB Host)
3. SPDIF Out
4. Rs232
5. IR out (IR blaster)
6. IR In (IR receiver)
7. DIP Switch Pin 1 OFF: DEFAULT
Pin 2 -
ON: FW upgrade mode Reserved
Pin 3 - OFF: HDBT Mode
ON: Long Reach Mode
8. POWER / VIDEO / LINK / MODE LED
FRONT VIEW (Receiver)
1. USB 2.0 (USB Device) 2. SPDIF Out 3. Rs232 4. IR out (IR blaster) 5. IR In (IR receiver) 6. DIP Switch Pin 1 OFF: DEFAULT
ON: FW upgrade mode Pin 2 - Reserved Pin 3 - OFF: HDBT Mode
ON: Long Reach Mode 7. POWER / VIDEO / LINK / MODE LED
REAR VIEW (Transmitter)
1. Power 48V DC 2. LINK Out (RJ-45 Connector) 3. HDMI In / Out 4. Audio In
REAR VIEW (Receiver)
1. LINK In (RJ-45 Connector) 2. HDMI Out 3. Audio Out 4. Audio In
Installation
1. Turn off source and display 2. Connect the HDMI cable between the source and the transmitter 3. Connect the HDMI cable between the display and the receiver 4. Connect the LAN (RJ45) cable between the transmitter and receiver 5. Connect mouse and keyboard 6. Connect the CAT cable between transmitter and receiver 7. Connect the power to both transmitter and receiver 8. Power on the source and display
Cable Length Specification
Cable Type
CAT6a(U/FTP)
Mega-characters per second, per channel (Mcsc)
450 <Mcsc <=594
HDBaseT Link Rate
16Gbps
<=450
12Gbps
CAT5e/CAT6 (UTP)
450 <Mcsc <=594 <=450
16Gbps 12Gbps
Max Video resolution
Range - Typical
4K/60Hz/4:4:4 video formats 4K/60Hz/4:2:0 HDR 12bit video
4K/60Hz/4:4:4 video formats
4K/60Hz/4:2:0 HDR 12bit video
100 meters (straight) 70 meters (with patches) 100 meters (with patches)
40 meters (straight) 30 meters (with patches)
70 meters (with patches)
IR Blaster Cable:
Connect the IR blaster cable to <IR OUT> port
IR Receiver Cable:
Connect the IR blaster cable to <IR OUT> port
© 2020 APANTAC LLC. All rights reserved 10200 SW Allen Blvd, Suite C Beaverton, OR 97005, USA PHONE +1 503 968 3000 FAX +1 503 389 7921 The content of this document is provided in connection with Apantac LLC ("Apantac") products. Apantac makes no representation or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specification and product descriptions at any time without notice
macOS Version 14.4.1 (Build 23E224) Quartz PDFContext