Manuals+

22.5 mm IEC Product Selection

Emergency Stop Operators

Non-Illuminated Twist-to-Release, Push-Pull

60 mm Non-Illuminated Twist-to-Release (Cat. No. 800FP-MT64)

A red, round emergency stop button, approximately 60mm in diameter, with a twist-to-release mechanism.

40 mm Non-Illuminated Push-Pull (Cat. No. 800FP-MP44)

A black, round emergency stop button, approximately 40mm in diameter, with a push-pull mechanism.

Color Size Pkg. Quantity Twist-to-Release (Trigger Action) Push-Pull (Trigger Action)
Plastic Cat. No. Metal Cat. No. Plastic Cat. No. Metal Cat. No.
Red 30 1 800FP-MT34 800FM-MT34
40 800FP-MT44 800FM-MT44 800FP-MP44 800FM-MP44
60 800FP-MT64 800FM-MT64

Illuminated - Twist-to-Release, Push-Pull

40 mm Illuminated Twist-to-Release (Cat. No. 800FP-LMT44)

A red, round emergency stop button, approximately 40mm in diameter, with a twist-to-release mechanism and integrated illumination.

40 mm Mushroom Push/Pull (Cat. No. 800FM-LMP44)

A red, round mushroom-shaped emergency stop button, approximately 40mm in diameter, with a push-pull mechanism and integrated illumination.

§ LED module required for illumination; incandescent modules cannot be used.

Color Size Pkg. Quantity Twist-to-Release (Trigger Action) Push-Pull (Trigger Action)
Plastic Cat. No. Metal Cat. No. Plastic Cat. No. Metal Cat. No.
Red 30 1 800FP-LMP34 800FM-LMP34
40 800FP-LMT44 800FM-LMT44 800FP-LMP44 800FM-LMP44
60 800FP-LMT64 800FM-LMT64 800FP-LMP64 800FM-LMP64

Key Release Mushroom Operator

40 mm Non-Illuminated Key Release (Cat. No. 800FP-MK44)

A yellow and red, round mushroom-shaped emergency stop button, approximately 40mm in diameter, with a key release mechanism.

Color Size Pkg. Quantity Ronis Key Lock (Trigger Action)
Plastic Cat. No. Metal Cat. No.
Red 40 mm 1 800FP-MK44 800FM-MK44

* All emergency stop operators are EN ISO 13850 compliant with standard NC, NCLB, or self-monitoring contact blocks.

+ For key options, see the Industrial Controls catalog.

2-Position Push-Pull Operators, Non-Illuminated

40 mm Trigger Action Twist-to-Release Mushroom (Cat. No. 800FP-MT44)

A red, mushroom-shaped operator, approximately 40mm in diameter, with a twist-to-release mechanism.

40 mm Trigger Action Push-Pull Mushroom (Cat. No. 800FP-MP44)

A red, mushroom-shaped operator, approximately 40mm in diameter, with a push-pull mechanism.

90 mm Half-Dome (Cat. No. 800FP-MP94)

A half-dome shaped operator, approximately 90mm in diameter.

Color Pkg. Quantity 40 mm Mushroom (Trigger Action) Twist-to-Release 40 mm Mushroom (Trigger Action) Push-Pull
Plastic Cat. No. Metal Cat. No. Plastic Cat. No. Metal Cat. No.
Red 1 800FP-MT44 800FM-MT44 800FP-MP44 800FM-MP44

Operator Configuration Options

Operator Construction Operator Type Color Cap Engraving
Code Description Code Description Code Color Code Description
P Round plastic operator (IP66, Type 4/4X/13) Push, Twist-to-Release MT3 30 mm color cap 2 Black Blank
MT4 40 mm color cap 3 Green LE EMO laser engraved
MT6 60 mm color cap 4 Red E EMO printed
M Round metal operator (IP66, Type 4/13) Push-Pull MP4 40 mm color cap 5 Yellow
Half-Dome Push-Pull MP9 90 mm color cap 6 Blue

* All emergency stop operators are EN ISO 13850 compliant with standard NC, NCLB, or self-monitoring contact blocks.

§ Only available with red color cap.

¶ For EMO guards, see the Industrial Control catalog.

• Only available on 40 mm color cap.

▲ Only available on red, 40 mm push, twist-to-release operator type (MT44).

† Half-dome operators only available with black, red, and yellow color caps.

2-Position Push-Pull Operators, Illuminated

40 mm Illuminated Twist-to-Release (Cat. No. 800FP-LMT44)

A red, round operator, approximately 40mm in diameter, with a twist-to-release mechanism and illumination.

40 mm Mushroom Push/Pull (Cat. No. 800FM-LMP44)

A red, mushroom-shaped operator, approximately 40mm in diameter, with a push-pull mechanism and illumination.

90 mm Half-Dome (Cat. No. 800FP-LMP94)

A half-dome shaped operator, approximately 90mm in diameter, with illumination.

Color Pkg. Quantity 40 mm Mushroom (Trigger Action) Twist-to-Release 40 mm Mushroom (Trigger Action) Push-Pull
Plastic Cat. No. Metal Cat. No. Plastic Cat. No. Metal Cat. No.
Red 1 800FP-LMT44 800FM-LMT44 800FP-LMP44 800FM-LMP44

Operator Configuration Options

Operator Construction Operator Type Lens Cap Color
Code Description Code Description Code Color
P Round plastic operator (IP66, Type 4/4X/13) Push, Twist-to-Release LMT4 40 mm color cap 3 Green
LMT6 60 mm color cap 4 Red
M Round metal operator (IP66, Type 4/13) Push-Pull LMP3 30 mm color cap 5 Yellow
LMP4 40 mm color cap 6 Blue
Half-Dome Push-Pull LMP6 60 mm color cap
LMP9 90 mm color cap

* LED module required for illumination; incandescent modules cannot be used.

+ All emergency stop operators are EN ISO 13850 compliant with standard NC, NCLB, or self-monitoring contact blocks.

§ Only available with red color cap.

¶ 60 mm version has black arrows; 30 and 40 mm versions have white arrows.

• When using LED for illumination, a white LED is recommended.

▲ Only available with 40 mm Push-Pull color cap (LMP4 from Table b).

† Half-dome operators only available with red and yellow lens cap colors.

2-Position Non-Illuminated Operators — Mushroom, Key Release

40 mm Key Release Mushroom (Cat. No. 800FP-MK44)

A red, mushroom-shaped operator, approximately 40mm in diameter, with a key release mechanism.

Color Pkg. Quantity 2-Position (Trigger Action) 40 mm Mushroom Key Release
Plastic Cat. No. Metal Cat. No.
Red 1 800FP-MK44 800FM-MK44

Note: For Ronis replacement keys, see the Industrial Controls catalog. Key release mushroom operators use key no. 3825.

Operator Configuration Options

Operator Construction Operator Type Lens Cap Color Ronis Key Lock
Code Description Mushroom Code Type Code Color Code Key No.
P Round plastic operator (IP66, Type 4/13) MK4 40 mm 4 Red Blank 3825 (Standard)
M Round metal operator (IP66, Type 4/13) R 455
01R 3801
02R 3802
03R 3803
04R 3804
05R 3805
06R 3806
27R 4001
28R 4002
29R 4003
30R 4004
31R 4005
32R 4006
33R 4007

* All emergency stop operators are EN ISO 13850 compliant with standard NC, NCLB, or self-monitoring contact blocks.

+ Keyed operators are IP66, Type 4/13.

§ Not intended for high security applications. Interoperability is possible with certain key/cylinder lock combinations. Consult your local Rockwell Automation sales office or Allen-Bradley distributor for interoperability information.

• For Ronis replacement keys, see the Industrial Controls catalog.

Momentary Push Button Operators, Non-Illuminated — Mushroom

40 mm Mushroom (Cat. No. 800FM-MM42)

A round, mushroom-shaped operator, approximately 40mm in diameter. Available in various colors.

60 mm Mushroom (Cat. No. 800FP-MM63)

A round, mushroom-shaped operator, approximately 60mm in diameter. Available in various colors.

90 mm Mushroom (Cat. No. 800FP-MM94)

A round, mushroom-shaped operator, approximately 90mm in diameter. Available in various colors.

Color Pkg. Quantity 40 mm Mushroom 60 mm Mushroom
Plastic Cat. No. Metal Cat. No. Plastic Cat. No. Metal Cat. No.
Black 1 800FP-MM42 800FM-MM42 800FP-MM62 800FM-MM62
Green 800FP-MM43 800FM-MM43 800FP-MM63 800FM-MM63
Red 800FP-MM44 800FM-MM44 800FP-MM64 800FM-MM64
Yellow 800FP-MM45 800FM-MM45 800FP-MM65 800FM-MM65
Blue 800FP-MM46 800FM-MM46 800FP-MM66 800FM-MM66

* Momentary mushroom operators are IP65 rated.

Operator Configuration Options

Operator Construction Size and Operator Type Color Cap
Code Description Mushroom Code Type Code Color
P Round plastic operator (IP65, Type 4/4X/13) MM4 40 mm momentary 2 Black
MM6 60 mm momentary 3 Green
MM9 90 mm momentary 4 Red
M Round metal operator (IP65, Type 4/13) 5 Yellow
6 Blue

Momentary Push Button Operators, Illuminated — Mushroom

40 mm Mushroom (Cat. No. 800FP-LMM43)

A round, mushroom-shaped operator, approximately 40mm in diameter, with integrated illumination. Available in various colors.

Color Pkg. Quantity 40 mm Mushroom
Plastic Cat. No. Metal Cat. No.
Green 1 800FP-LMM43 800FM-LMM43
Red 800FP-LMM44 800FM-LMM44
Yellow 800FP-LMM45 800FM-LMM45
Blue 800FP-LMM46 800FM-LMM46
Clear 800FP-LMM47 800FM-LMM47

3-Position Push-Pull Operators, Illuminated & Non-Illuminated — Mushroom

Illuminated 3-Position Push-Pull (Cat. No. 800FM-LMP44E3)

An illuminated, 3-position, mushroom-shaped operator.

Target Table and Operator Position

Contact Type Out Center In
N.O. O O X
N.C.E.B. X O O
N.C.L.B. X X O

Note: X = Closed / O = Open

► Contact selection is limited to the following options; consult your local Rockwell Automation sales office or Allen-Bradley distributor for other options.

Operator Construction Operator Type Operator Function Cap Size Cap Color Positions
Code Description Code Description Code Description Code Description Code Description Code
M Round metal operator (IP66, Type 4/13) Blank Non-Illuminated MM Momentary Out, Maintained Center, Momentary In 4 40 mm Plastic 2 Black E3
L Illuminated MP Momentary Out, Maintained Center, Maintained In 3 Green
4 Red
6 Blue
7 Clear

* Cannot use N.C. or N.O.E.M. contact blocks with 3-position push-pull operators. Must use N.O., N.C.E.B., or N.C.L.B. contact blocks.

+ Available in integrated LED version only.

§ Available in illuminated only.

• Available in non-illuminated only.

Back-of-Panel Components

Contact Blocks with Latch Composite

Style Contact Block(s) Termination Style N.O. (Normally Open) Circuits N.C. (Normally Closed) Circuits Specialty Contact Block(s)
Code Description Code Description Code Description Code Description Code Description
P Plastic latch X Screw termination 0 No contact 0 No contact Blank Standard blocks
M Metal latch Q Spring-clamp termination 1 1 N.O. 1 1 N.C. V Low voltage - QuadCONNECT™
2 2 N.O. 2 2 N.C. E N.O. early make
3 3 N.O. 3 3 N.C. L N.C. late break
4 4 N.O. 4 4 N.C. S N.C. self-monitoring
5 5 N.O. 5 5 N.C.
6 6 N.O. 6 6 N.C.

* Six circuits maximum allowable.

Power Modules

Power Modules with Latch Composite
Style Power Module Type* ‡ Voltage Lamp Color
Code Description Code Description Code Description Code Description
P Plastic latch D Incandescent module, screw termination 0 No bulb C Incandescent
M Metal latch N Integrated LED module, screw termination 1 6V AC/DC R Red LED
Q Integrated LED module, spring-clamp termination 2 12V AC/DC G Green LED
3 24V AC/DC Y Amber LED
4 48V AC/DC W White LED
5 120V AC B Blue LED
7 240V AC

§ LED modules for use with all illuminated operators. Incandescent module for use with pilot lights, momentary push buttons, and momentary mushroom operators only.

• Four circuits maximum allowable when power module is used. Do not stack contact block on power module.

▲ Only available for incandescent module.

◆ Only available for integrated LED module.

• For best illumination results, LED color should match lens color. For yellow operator, select a white LED.

Back-of-Panel Components, Continued
Power Modules with Contact Blocks and Latch Composite
Style Power Module Type* ‡ Voltage Lamp Color Contact Block(s) Termination Style N.O. (Normally Open) Circuits N.C. (Normally Closed) Circuits Specialty Contact Block(s)
Code Description Code Description Code Description Code Description Code Description Code Description Code Description Code Description
P Plastic latch D Incandescent module, screw termination 0 No bulb C Incandescent X Screw termination 0 No contact 0 No contact Blank Standard blocks
M Metal latch N Integrated LED module, screw termination 1 6V AC/DC R Red LED Q Spring-clamp termination 1 1 N.O. 1 1 N.C. V Low voltage - QuadCONNECT™
Q Integrated LED module, spring-clamp termination 2 12V AC/DC G Green LED 2 2 N.O. 2 2 N.C. E N.O. early make
3 24V AC/DC Y Amber LED 3 3 N.O. 3 3 N.C. L N.C. late break
4 48V AC/DC W White LED 4 4 N.O. 4 4 N.C. S N.C. self-monitoring
5 120V AC B Blue LED 5 5 N.O. 5 5 N.C.
7 240V AC 6 6 N.O. 6 6 N.C.

* Four circuits maximum allowable when power module is used. Do not stack contact block on power module.

+ LED modules for use with all illuminated operators. Incandescent module for use with pilot lights, push buttons, and momentary mushroom operators only.

§ Only available for incandescent module.

• Only available for integrated LED module.

▲ For best illuminated results, LED should match lens color. For yellow operator, select a white LED.

Back-of-Panel Components, Continued

Metal Mounting Latch

These are zinc-plated, metal die cast mounting latches.

Description Cat. No. Pkg. Quantity Cat. No.
Metal Mounting Latch 800FALM 10 800F-ALM
100 800F-ALM-BP

Note: Sold only in multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces.

Plastic Mounting Latch
Description Cat. No. Pkg. Quantity Cat. No.
Plastic Mounting Latch 800FALP 10 800F-ALP
100 800F-ALP-BP

Note: Sold only in multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces.

Contact Block

Description Contact Type Pkg. Quantity Cat. No.
Contact Block (Latch not included) N.O. 10 800F-X10
N.C. 800F-X01
N.O. low voltage - QuadCONNECT™ 800F-X10V
N.C. low voltage - QuadCONNECT™ 800F-X01V
N.O.L.M. 800F-X10N
N.O.E.M. 800F-X10E
N.O.E.E.M. 800F-X10M
N.C.L.B. 800F-X01L
N.C.E.B. 800F-X01B
Self-Monitoring 800F-X01S
Dual circuit of 2 N.O. 800F-X20D
Dual circuit of 2 N.C. 800F-X02D
Dual circuit of 1 N.O.-1 N.C. 800F-X11D
N.O. with stab terminals 800F-X10T
N.C. with stab terminals 800F-X01T
N.O. spring-clamp 800F-Q10
N.C. spring-clamp 800F-Q01
N.O. spring-clamp low-voltage - QuadConnect™ 800F-Q10V
N.C. spring-clamp low-voltage - QuadConnect™ 800F-Q01V
N.O.E.M. spring-clamp 800F-Q10E
N.C.L.B. spring clamp 800F-Q01L
N.C.E.B. spring-clamp 800F-Q01B
Ring lug N.O. 800F-R10
Ring lug N.C. 800F-R01
N.O. 100 800F-X10-BP
N.C. 800F-X01-BP

Note: Sold only in multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces.

Note: Sold only in multiples of 100. Order (quantity of) 100 to receive one package of 100 pieces.

▲ For use with Cat. No. 800FP-CB_ and Cat. No. 800FP-CC_ operators.

◆ For use with Cat. No. 800FP-CC_ operators.

* Only for use with 4-position selector switch, 4-position toggle switch, or 3-position push-pull operator.

+ Cannot stack.

§ Cannot be used in a composite catalog number.

• Replacement screws are available (Cat. No. 800F-ARS1)

Incandescent Module

For use with pilot lights, push buttons, and momentary mushroom operators.

Description Volts Pkg. Quantity Cat. No.
Incandescent Module No bulb 10 800F-D0C
6V AC/DC 800F-D1C
12V AC/DC 800F-D2C
24V AC/DC 800F-D3C
48V AC/DC 800F-D4C
120V AC/DC 800F-D5C

Note: Sold in multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces. Latch not included.

Integrated LED Module

For use with all illuminated devices. For best results, LED should match lens color. For amber, yellow, and blue operators use white LED.

Description Volts Pkg. Quantity Cat. No.
Integrated LED Module 120V AC 10 800F-N5x
240V AC 800F-N7x
24V AC/DC spring-clamp 800F-Q3x
120V AC spring-clamp 800F-Q5x
240V AC spring-clamp 800F-Q7x
24V AC/DC ring lug 800F-R3x

Note: Sold in multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces. Latch not included.

Base Mounted Contact Block

Base mounted contact blocks can be used in plastic or metal enclosures.

Description Contact Material Pkg. Quantity Cat. No.
Base Mounted Contact Block N.O. 10 800F-BX10
N.C. 800F-BX01
N.O. low voltage - QuadCONNECT™ 800F-BX10V
N.C. low voltage - QuadCONNECT™ 800F-BX01V
N.O.E.M. 800F-BX10E
N.C.L.B. 800F-BX01L
N.O. spring-clamp 800F-BQ10
N.C. spring-clamp 800F-BQ01

Note: Sold only in multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces. Latch not included.

Base Mounted Integrated LED Module

Base mounted modules can be used in plastic or metal enclosures. For best illumination results, LED should match lens color.

Description Volts Pkg. Quantity Cat. No.
Base Mounted Integrated LED Module 24V AC/DC 10 800F-BN3x
120V AC 800F-BN5x
240V AC 800F-BN7x
24V AC/DC spring-clamp 800F-BQ3x
120V AC spring-clamp 800F-BQ5x
240V AC spring-clamp 800F-BQ7x

Note: Sold in multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces. Latch not included.

* To complete the cat. no., replace the x with one of the following letters for the desired color: Y = Amber, R = Red, G = Green, B = Blue, W = White.

+ Cannot be used in a composite catalog number.

§ Replacement screws are available (Cat. No. 800F-ARS1)

Assembled Stations

1-Hole Yellow Enclosure E-Stop Station (Cat. No. 800F-1YP4)

A yellow enclosure housing an emergency stop station.

PDF preview unavailable. Download the PDF instead.

800FP-LMM47 EvoPdf HTML to PDF Converter 3.5

Related Documents

Preview Allen-Bradley Bulletin 800F 22.5 mm Push Buttons Product Selection Guide
Explore the comprehensive Allen-Bradley Bulletin 800F series of 22.5 mm push buttons, selector switches, pilot lights, and emergency stop operators. Find detailed product selection information, specifications, and part numbers for industrial control applications.
Preview Allen-Bradley 800F 22.5 mm Push Buttons: Product Overview and Specifications
A comprehensive guide to the Allen-Bradley 800F series of 22.5 mm push buttons from Rockwell Automation, detailing modular flexibility, superior design, durable materials, and a wide range of operators, selector switches, emergency stop buttons, contact blocks, enclosures, and accessories for industrial control applications.
Preview Allen-Bradley 800TX647Y Legend Plate - Technical Specifications
Detailed specifications for the Allen-Bradley 800TX647Y legend plate, a yellow rectangular plate designed for 30.5mm push-to-stop, twist-or-pull-release emergency stop operators.
Preview Allen-Bradley 800FME5 22.5mm Metal Pushbutton - Yellow, Non-Illuminated
Detailed specifications for the Allen-Bradley 800FME5 pushbutton, a 22.5mm metal head-only MOM (Momentary) operator control device. Features include IP66 protection, chrome front ring, and yellow button. Includes related accessories.
Preview Allen-Bradley 800F E-Stop 22.5mm Emergency Stop Operator - 800FPMT44PX01S
Detailed information on the Allen-Bradley 800F E-Stop operator, a reliable and durable solution for industrial emergency applications. Features include 22.5mm mounting, turn-release unlocking, and IP65/IP66/IP69K rating. Includes specifications and related accessories.
Preview Allen-Bradley 800FMF3 22.5mm Metal Pushbutton - Green Momentary Flush Non-Illuminated
Detailed specifications and overview of the Allen-Bradley 800FMF3, a 22.5mm metal momentary flush pushbutton with a green non-illuminated cap. Features include IP66 protection, mechanical specifications, and dimensions. Includes related accessories.
Preview Allen-Bradley 800F Grey Plastic Hole Plug 22.5mm | NHP
Product information for the Allen-Bradley 800F Grey Plastic Hole Plug 22.5mm, a 22.5mm mount operator control device accessory. Details on specifications, mechanical, and environmental properties.
Preview Allen-Bradley 800F-X11D Double Circuit Contact Block | Technical Datasheet
Detailed technical datasheet for the Allen-Bradley 800F-X11D 1NO 1NC Double Circuit Contact Block. Specifications, certifications, and product information from NHP Electrical Engineering Products.