Instruction Manual for LUCAS LED models including: PX0406, RDM RGBW Decoder, PX0406 RDM RGBW Decoder, RGBW Decoder, Decoder

PX0408 SPEC

PX0406

Download Manual

DMX Led Controller RGB/RGBW 4x6A 12-24VDC PX0406 - Lucas Led

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 2 Pages, 3.38MB

Document Document

PX0406
%.93%.3(#8%FDPEFS
Summary
Welcome to use PX series DMX512/RDM decoder & driver. PX series adopt the advanced micro-computer control technology and converted the DMX512,RDM/2009 digital signal widely used in international to the PWM control signal. 1~4 channels output for option and each channel able to achieve 256 gradations of controlling, and also it can be used as the connector of PC digital light controller and analog light modulator. It is mainly used for the controlling of buildings & lights applied LED.

Product Features

· Meets DMX512/1990,RDM /2009 protocol

· Supported RDM parameters:

DISC_UNIQUE_BRANCH

DISC_MUTE

DISC_UN_MUTE DEVICE_INFO

Dimension(mm)

SOFTWARE_VERSION_LABEL

DMX512/RDM_START_ADDRESS

IDENTIFY_DEVICE

MANUFACTURER_LABEL

SUPPORTED_PARAMETERS

· In DMX mode set the DMX address manually by switch; in RDM

mode, the host computer address allocation

· Constant voltage output, the maximum current of 6A /ch for

RGBW decoder

· 256 grade brightness adjustment

· Short-circuit protection,overload protection,over-temperature protection

·Flicker-free

PX0406

Technical Parameters

Interface Description

.PEFM 0VUQVU *OQVU
0UIFST

19 

$IBOOFMT



7PMUBHF

7%$

$VSSFOU

"$)

1PXFS

8 7
8 7


7PMUBHF

 7%$

4UBOECZMPTT  8

$POUSPMTJHOBM %.93%.

%JNFOTJPO NNc-  8 )

1BDLJOHTJ[F  NNc-  8 )

(8

H

0QFSBUJPO UFNQFSBUVSF

   ¥

3FMBUJWF IVNJEJUZ

  3)





1

2

3

4

5

6

(1) RJ45 Signal input and output interfaces (2) Signal light (3) Euro terminal blocks (4) Address setting interface (5) Power input interface
(reverse connection of input will damage thedriver, make sure the wiring is correct before power on.) (6) Output interface

6TFS.BOVBM7

PX0406

Remark Connect the anode and RGBW wire of common anode RGBW module to the output interface of decoder directly; Connect the anode wire of single-color module to V+ on decoder, and connect the cathode wire to one of RGBW pin according to the LED's color; Connect several colors single-color module to one decoder, please connect their anode wires to V+ pin on decoder.

DIP Switch Setting

0'' 0/

%*1  

%*1  

%*1  

%*1  

%*1  

%*1  

%*1  

%*1 


%*1 


%*1 /" '6/

DIP1~9: Setting the first DMX address of devicethe sum of number showed in the table above is the first DMX address of device. In DMX mode, the effective address is 1-511, and 511 is for fixed mode (511 means output RGBW gradient). When the address is 0, the default is RDM mode. DIP10: FUN is 120 ohm terminal resistance.

1) Use the CAT-5 cable or three-core shielded cable as DMX512/ RDM signal cableand DMX512/RDM signal has the positive and negative signal. While welding the DMX512/RDM signal cable plug, there must pay much attention to distinguish between positive (+) and negative(-), and then connect the DMX512/RDM signal cable with the corresponding input interface of PX0406 correctly. 2) Refer to "DMX Series of address dial code table" to set DMX address by dip-switch. 3) Connect a signal terminal at the end of the whole connection.

Wiring Diagram
Signal Output Signal Input Signal Output

DMX Master
DCDC+ 12/24V Input

RGBW or RGB lamp





6TFS.BOVBM7