User Manual for FOURKAY models including: EXHD-TCP150 HDMI over IP Extender, EXHD-TCP150, HDMI over IP Extender, over IP Extender, IP Extender, Extender
FOURKAY 1080p HDMI over TCP/IP Extender. 150m Range. HDMI Loop Out. IR Control Pass Back. Setup as One to One or One to Many: Electronics & Photo
HDMI over IP Extender with Loop Out (150m) VER 1.0 Thank you for purchasing this product For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. Surge protection device recommended This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lighting strikes, etc. Use of surge protection systems is highly recommended in order to protect and extend the life of your equipment. Table of Contents 1. Introduction...........................................................................................1 2. Features.................................................................................................1 3. Package Contents...............................................................................1 4. Specifications.......................................................................................2 5. Operation Controls and Functions.....................................................3 5.1 Encoder Panel................................................................................3 5.2 Decoder Panel...............................................................................4 6. Application Example...........................................................................5 1. Introduction HDMI over IP Extender is based on AV over IP solution for distribution of one HD content to one HD display device or to multiple HD display devices over a standard network switcher, and extends distance up to 492ft / 150m between encoder and decoder via a CAT5e/6 cable. It offers configurable high quality, low-bandwidth H.265 compression video. The resolution is up to 1920x1200@60Hz. It also supports HDMI loop output on transmitter. HDMI over IP Extender includes two units: Encoder and Decoder. Encoder is responsible for obtaining HDMI signals for encoding, transmitting via CAT5e/6 cables. It supports HDMI loop output; Decoder is responsible for signal decoding and outputting HDMI signals to HD displays. The product supports one-way IR control signal transmission. It offers the most convenient solution for HDMI extension over a single CAT5e/6 cable and is the perfect solution for any application. 2. Features HDMI 1.3 and HDCP 1.4 compliant Support 6.75Gbps video bandwidth Video resolution is up to 1920×1200@60Hz Extend distance up to 492ft / 150m between encoder and decoder via a single CAT5e/6 cable Adopt standard H.265 encoding / decoding Support standard IP swticher / router / hub Support one-way IR control signal transmission Compact design for easy and flexible installation 3. Package Contents 1× HDMI over IP Extender (Encoder) 1× HDMI over IP Extender (Decoder) 1× IR Blaster cable (1.5 meters) 1× 20~60KHz IR Receiver cable (1.5 meters) 2× 5V/1A Power Adapters 1× User Manual 1 / 6 4. Specifications Technical HDMI Compliance HDCP Compliance HDMI 1.3 HDCP 1.4 Video Bandwidth 6.75Gbps Video Resolution 640x480@60Hz~1920x1200@60Hz HDMI Audio Formats LPCM 2.0CH, 32KHz, 44.1KHz, 48KHz IR Frequency Compression Technology Request for Switcher /Router Color Space 20Hz ~ 60KHz H.265 Support IGMP, Support DHCP RGB YCbCr 4:4:4, YCbCr 4:2:2 Color Depth ESD Protection Connection 8-bit Human body model--±8kV (Air-gap discharge) & ±4kV (Contact discharge) Encoder Input: 1×HDMI IN [Type A 19-pin female] Output: 1×HDMI OUT [Type A 19-pin female] 1×CAT OUT [RJ45 connector] Control:1×IR OUT [3.5mm Stereo Mini-jack] Decoder Input: 1×CAT IN [RJ45 connector] Output: 1×HDMI OUT [Type A 19-pin female] Control:1×IR IN [3.5mm Stereo Mini-jack] Mechanical Housing Metal Enclosure Color Dimensions Black 88mm (W) × 61.2mm (D) × 16.5mm (H) Weight Encoder: 158g, Decoder: 155g Power Supply Power Consumption Input: AC100 - 240V 50/60Hz, Output: DC 5V/1A (US/EU standard, CE/FCC/UL certified) Encoder: 2.55W, Decoder: 3.7W Operation Temperature -10°C ~ 50°C / 14°F ~ 122°F 2 / 6 Storage Temperature Relative Humidity Resolution / Distance CAT 5e/6 cable Resolution / Cable length HDMI IN / OUT -20°C ~ 60°C / -4°F ~ 140°F 20~90% RH (non-condensing) 1920x1200@60Hz - Feet / Meter 492ft / 150 meters 1920x1200@60Hz - Feet / Meter 50ft / 15 meters 5. Operation Controls and Functions 5.1 Encoder Panel HDMI OUT HDMI IN RESET CAT OUT IR OUT DC 5V Name HDMI OUT HDMI IN RESET button CAT OUT IR OUT Function Description HDMI Loopout port for connecting the HDMI display device. HDMI source input port for connecting the HDMI source device. Press and hold the button for 3 seconds to reset the product. The EDID will restore default status: 1920*1080@60Hz The CAT OUT port is connected to the CAT IN port on Decoder or connected to switcher / router / hub with CAT cable for sending signal to receiver. Connect to the IR blaster cable. The IR blaster signal is from IR IN on the Decoder. 3 / 6 LINK LED POWER LED DC 5V The LED will flash blue when encoder is connected to decoder or connected to switcher / router / hub. The LED will illuminate blue when the encoder is powered on. Plug the DC 5V/1A power supply into the unit and connect the adapter to an AC outlet. 5.2 Decoder Panel HDMI OUT RESET CAT IN IR IN DC 5V Name Function Description HDMI OUT HDMI output port for connecting the HDMI display device. RESET Press and hold the button for 3 seconds to reset the product to the factory default status button Short press the button to copy EDID from decoder display device to encoder's HDMI source device. CAT IN The CAT IN port is connected to the CAT OUT port on Encoder or connected switcher / router / hub with CAT cable for receiving encoder signal. IR IN Connect to wideband IR receiver cable. The IR signal is sent to IR OUT port on the Encoder. LINK LED The LED will flash blue when decoder is connected encoder or connected switcher / router / hub. POWER The LED will illuminate blue when the Decoder is powered LED on. DC 5V Plug the DC 5V/1A power supply into the unit and connect the adapter to an AC outlet. 4 / 6 6. Application Example TV TV DVD or Blu-ray Player HDMI OUT HDMI IN RESET HDMI OUT RESET CAT OUT IR OUT DC 5V Encoder Decoder CAT IN IR IN DC 5V IR Blaster Power Supply Power Supply Ethernet CAT5e/6 IR Receiver Figure 1: Encoder connects directly Decoder 5 / 6 DVD or Blu-ray Player TV HDMI Cable HDMI OUT HDMI Cable HDMI IN RESET CAT OUT IR OUT DC 5V Encoder Ethernet CAT5e/6 Switch TV HDMI Cable TV HDMI OUT RESET CAT IN IR IN DC 5V HDMI CableDecoder HDMI OUT RESET CAT IN IR IN DC 5V HDMI Cable Decoder TV HDMI Cable Ethernet CAT5e/6 HDMI OUT RESET CAT IN IR IN DC 5V Decoder Figure 2: Encoder connects Decoder via switcher (one Encoder to multiple Decoders) 6 / 6Adobe PDF library 15.00