INTERMATIC

Setting The Time of Day:

Follow this procedure to set the time of day and day of the week.

1. Press and release the Reset button with a blunt object to reset the unit. The timer screen flashes.
2. Press and hold ? and h+ simultaneously to access the 12:00 AM screen.
3. Take one of these actions.

   If...	Then...
   Your time zone currently is in Daylight Savings Time,	Press the +1h button. Go to step 4.
   Your time zone is not in Daylight Savings Time	Go to step 4 to set the current time.

4. Press and hold ? and press h+ repeatedly until you advance to the current hour.
5. Press and hold ? and press m+ repeatedly until you advance to the current minute.
6. Press and hold ? and press Day repeatedly until you advance to the current day.

Programming Events

To set ON/OFF event pair, set ON event and then repeat procedure to set OFF event. The timer enables up to 7 ON/OFF event pairs.

1. Press the Timer button. Dashed lines appear to indicate no event is set for event 1.
2. Press Day to select the days of the week for the ON event. NOTE: To set the ON event:

   Selection Type	Available Options
   ON a Specific Day	MO TU WE TH FR SA SU
   Every Day of Week	MO, TU, WE, TH, FR, SA, SU
   Every Weekday:	MO, TU, WE, TH, FR
   Every Weekend:	SA, SU
   Monday through Saturday	MO through SAT
   Monday, Wednesday, Friday	MO, WE, FR

3. Press h+ to scroll to the desired hour for ON event.
4. Press m+ to scroll to the desired minute for the ON event.
5. Press Timer to advance to the OFF event screen.
6. Press Day to select the days of the week for the OFF event.
7. Press h+ to scroll to the desired hour for the OFF event.
8. Press m+ to scroll to the desired minute for the OFF event.

Notes:

• If events include or intersect with each other, each ON/OFF event can be independently executed at the setpoint.
• If an ON event and OFF event occur at the same time, the timer will run the OFF event.

Model Number: 300GR10139