Optoma HD65 Projector User Manual

Table of Contents

This document does not include a table of contents.

Introduction

The Optoma HD65 is a high-definition projector designed for home theater and presentations. It offers exceptional image quality and a user-friendly interface.

Safety Precautions

Please read and follow all safety instructions before operating the projector.

• Ensure the projector is placed on a stable, flat surface.
• Do not block the ventilation openings.
• Avoid looking directly into the projector lens when it is on.
• Disconnect the power cord before cleaning or maintenance.
• Keep the projector away from water and moisture.

Package Contents

Your Optoma HD65 package should include:

• Optoma HD65 Projector
• Remote Control
• Power Cord
• User Manual
• VGA Cable

Projector Overview

The projector features various controls and connectors:

Top Panel

• Power Button: Turns the projector on/off.
• Menu Button: Accesses the on-screen display (OSD) menu.
• Navigation Buttons: Up, Down, Left, Right, and Enter for menu navigation.
• Exit Button: Exits the OSD menu.

Rear Panel

• HDMI Port: For digital video and audio input.
• VGA Port: For analog video input.
• S-Video Port: For S-Video input.
• Composite Video Port: For composite video input.
• Audio In/Out Ports: For audio connections.
• USB Port: For firmware updates or remote control.
• Power Input: Connect the power cord here.

Setup and Installation

Connecting the Projector

Connect your video source (e.g., computer, Blu-ray player) to the appropriate input port on the projector using the corresponding cable (HDMI, VGA, etc.).

Powering On

1. Connect the power cord to the projector and a power outlet. 2. Press the Power button on the projector or remote control. 3. The projector will begin its startup sequence.

Adjusting the Image

• Focus: Rotate the focus ring on the lens until the image is sharp.
• Zoom: Use the zoom lever on the lens to adjust the image size.
• Keystone Correction: If the image appears trapezoidal, use the keystone correction feature in the OSD menu to adjust the picture shape.

Operation

Using the Remote Control

The remote control allows you to access all projector functions, including power, menu navigation, input selection, and image adjustments.

Navigating the Menu

Use the navigation buttons on the projector or remote control to access and adjust settings within the OSD menu. The main menu categories include:

• Display: Adjust brightness, contrast, color, and aspect ratio.
• Image: Fine-tune focus, keystone, and position.
• System: Set language, auto-off, and other system preferences.
• Advanced: Access advanced settings like color temperature and gamma.

Maintenance

Cleaning the Lens

Gently clean the projector lens with a soft, lint-free cloth. For stubborn smudges, use a lens cleaning solution specifically designed for optical lenses.

Cleaning the Air Filter

The air filter prevents dust from entering the projector. Clean the filter regularly according to the instructions in the OSD menu or as described below.

1. Turn off and unplug the projector.
2. Locate the air filter cover on the projector.
3. Remove the filter and clean it with a soft brush or vacuum cleaner.
4. Reinstall the filter and close the cover.

Troubleshooting

If you encounter issues with your projector, refer to the following common problems and solutions:

Specifications

Refer to the official Optoma website for detailed technical specifications of the HD65 projector.

Contact Information

For further assistance or support, please visit the Optoma website or contact Optoma customer service.