30W Solar Panel Light Cord
Instructions for Installation, Operation, and Safety
Getting Started
Before using the light string, the solar panel must be fully charged with a USB C cable. The charging time is 13 hours.
Placement and Installation
Please pay attention to the following points when placing the solar panel and hanging the light string:
Sunny Spot
The solar panel should be placed in a sunny spot where it can absorb maximum sunlight. This ensures better battery charging and brighter, longer-lasting illumination.
No Shaded Area
Ensure the solar panel is not in shade from houses or trees for extended periods. Shade prevents adequate battery charging, resulting in dimmer, shorter, or no light when dark.
Other Light Sources
Do not place the solar panel near other light sources. Ambient light can disrupt the panel's light/dark sensor, preventing the light string from turning on.
Cable Management
Make sure the cable connecting the solar panel to the first light is not pinched to prevent cable breakage. Do not allow the light cord to hang unsupported over its entire length; support it every half meter to prevent cable breakage.
Dimensions
The solar panel measures approximately 35 cm in width and 58 cm in height, with a thickness of 3.5 cm. The back of the panel includes a junction box with controls.
Operation of the 30W Solar Panel
On/Off Button
- Press 1 time: Turns the light string on.
- Press 2 times: Activates the 2-hour timer. An indicator light turns green.
- Press 3 times: Activates the 4-hour timer. An indicator light turns red.
- Press 4 times: Turns the light string off.
2-hour timer: Lights automatically turn off after two hours.
4-hour timer: Lights automatically turn off after four hours.
Mode Button
- Press 1 time: Sets brightness to 100%.
- Press 2 times: Sets brightness to 50%.
- Press 3 times: Lights will blink slowly.
Solar Panel Specifications
- Charging time using a USB C cable: 13 hours.
- Battery capacity: 12 x 2000mAh.
Safety Guidelines
General Safety
- Read the manual carefully before use and keep it for future reference.
- Use the product only for its intended purposes as described in the manual.
- Do not use if any part is damaged or defective; replace immediately.
- Do not modify the product in any way.
- Do not expose to water or moisture (IP20 rating). Do not immerse in water (IP44 - IP66 rating).
- Keep away from heat sources.
- Do not block ventilation openings.
- Do not look directly into the LED light source.
- Maintain a minimum distance of >2 meters between the lamp and the illuminated surface.
Electrical Safety
- To reduce the risk of electric shock, the product should only be opened by an authorized technician for service.
- Do not use if the cable or plug is damaged or defective; replacement must be by the manufacturer or authorized agent.
- Ensure the voltage matches the device's rating plate before use.
Warnings
- The light source in this luminaire shall only be replaced by the manufacturer, their service agent, or a similarly qualified person.
- Caution: Risk of electric shock.
- The external flexible cable or cord cannot be replaced; if damaged, the luminaire must be destroyed.
- This product is not a toy; keep it inaccessible to children.
Disposal
The product is designated for separate collection at an appropriate collection point. Do not dispose of with household waste. Contact the retailer or local authority for waste management information.
Care and Maintenance
Before cleaning, disconnect the unit from the power source if applicable. Do not use aggressive cleaning agents.
Warranty
The unit has been checked for defects. For complaints, return the product with proof of purchase to the retailer.
Compliance
This product complies with the following directives:
- EMC: 2014/30/EU
- RoHS: 2011/65/EU
- RED: 2014/53/EU (for products with radio transmitter units)
LVD: 2014/35/EU is noted as not applicable for solar products.
Imported by: Lumen Import B.V., Postbus 15980, 1001 NL Amsterdam, the Netherlands. Made in China.