Niceboy ION AirSilk PRO User Manual

Description

The hair straightener features the following components:

• 1. The body
• 2. Lock system
• 3. ON/OFF button
• 4. Temperature setting button
• 5. Display
• 6. Ceramic plates
• 7. Power cable

A diagram illustrates these parts.

How to Use a Hair Iron

For the best possible results, use the product on washed, dry hair. The iron can be used to finish the details at any time.

After connecting to the network, "OFF" appears on the display. To turn it on, press and hold the ON/OFF button for 2 seconds.

Immediately after switching on, the ceramic plates start to heat up. The display shows the default set temperature of 230 °C. The indicator bar showing the heating status lights up gradually until the product is heated to the required temperature. The indicator bar stops flashing when the iron heats up to the required temperature.

In the running state, you can adjust the temperature using the "+" and "-" buttons.

To turn it off, press and hold the ON/OFF button for 2 seconds.

If a problem occurs during startup or use, the display will show "888".

Safety Precautions

DANGER - To Reduce the Risk of Electric Shock:

1. Always unplug the appliance immediately after use.
2. Do not use while bathing.
3. Do not place or store this appliance where it could fall or be pulled into a bathtub or sink.
4. Do not place or immerse the device in water or any other liquid.
5. Do not reach for an appliance that has fallen into water. Unplug the appliance immediately.

WARNING:

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or with a lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised so that they do not play with the appliance.
• Do not use this appliance near bathtubs, showers or other devices containing water.
• In order to avoid risk, if the power cord is damaged, it must be repaired or replaced by the manufacturer, the maintenance department, or the professional personnel of a similar department.
• Always unplug the appliance after use.
• If the appliance overheats, it switches off automatically. Unplug the appliance and let it cool down for a few minutes.
• If the mains cable is damaged, it must be replaced by a qualified person to avoid a hazard.
• For additional protection, we recommend installing a residual current device (RCD) in the electrical circuit that supplies the bathroom. This RCD must have a rated residual operating current of no more than 30 mA. Ask your plumber for advice.
• Before connecting the appliance, make sure that the voltage indicated on the appliance corresponds to the local voltage.
• Do not use the appliance for purposes other than those described in this manual.
• Do not use the device on artificial hair.
• When the appliance is connected to the power supply, never leave it unattended.
• Never use accessories or parts from other manufacturers or those not expressly recommended by the manufacturer. If you use such accessories or parts, the warranty will be void.
• Do not wind the main cable around the appliance.
• Wait for the appliance to cool down before storing it.
• Do not pull the power cord after use. Always disconnect the appliance from the socket by holding the plug.
• Do not use the appliance with wet hands.
• Always return the appliance for inspection or repair to a service center authorized by the manufacturer. Repairs carried out by unqualified persons could lead to an extremely dangerous situation for the user.
• The power cord cannot be replaced. If the cord is damaged, the appliance should be discarded.

Parameters

Declaration of Conformity

Niceboy s.r.o. hereby declares that the NICEBOY ION AIRSILK PRO complies with Directives 2014/35/EU, 2014/30/EU and 2011/65 / EU. The full content of EU Declaration of Conformity is available on the following websites: https://niceboy.eu/en/declaration/ion-airsilk-pro

Information for Users on Disposal of Electrical and Electronic Equipment (Households)

The symbol on the product or in the accompanying documentation means that used electrical or electronic products must not be disposed of with municipal waste. In order to dispose of the product correctly, please take it to the designated collection points where it will be accepted free of charge. Proper disposal of this product will help conserve valuable natural resources and help prevent potential negative environmental and human health impacts that could result from improper waste disposal. For more details, contact your local authority or nearest collection point. Fines may be imposed for improper disposal of this type of waste in accordance with national regulations. Information for users on the disposal of electrical and electronic devices (corporate and business use). For proper disposal of electrical and electronic equipment for corporate and business use, consult the manufacturer or importer of this product. They will provide you with information on how to dispose of the product and, depending on the date of placing the electrical equipment on the market, who is obliged to finance the disposal of this electrical equipment. Information on disposal in other countries outside the European Union. The above symbol is only valid in European Union countries. For the correct disposal of electrical and electronic equipment, please ask your authorities or equipment dealer for detailed information.

[Symbol: Crossed-out wheelie bin]