Instructions for superbrightleds com models including: STREB-Y1 48 Inch Bar LED Light, STREB-Y1, 48 Inch Bar LED Light, Bar LED Light, LED Light
Version: 20221005-506 Operating Voltage: DC 12-24V 22": 26 Flash Patterns (Form A) Single flash (ECE R65) Double flash (ECE R65) Eight - half to half Cross flash CW Rota on - triple CCW Rota on - triple All - half to half All - Single - Quick Triple flash (ECE R65) Quad flash (ECE R65) Eight flash Twelve flash CW constant flash CCW constant flash CW constant on CCW constant on CW Rota on CCW Rota on Le and right constant flash Single flash (ECE R65) Double flash + Rota on One-one single flash One-one eight flash Le Steady Right Single Le Single Right Steady Steady on Power On/Off Flash pa ern + low intensity + color selector: ......Press less than 1s for next pa ern. ......Press 1-3s for previous pa ern. ......Press more than 5s for low intensity, press more than 5s again back to normal intensity. For dual color: press 3-5s for changing color 1 to color 2, press 3-5s again for color 1 alternate to color 2, press 3-5s again back to color 1. RED: +VDC BLACK: -GROUND GREY: (differrent type apply to different wire, type reference to Page 1) ......type : constantly connect to red wire to achieve low intensity. ......type : constantly connect to black wire to achieve low intensity. YELLOW: (type apply to red wire, type apply to black wire) ......less than 1s for next pa ern. ......1-3s for previous pa ern. ......3-5s for changing color 1 to color 2, 3-5s again for color 1 alternate to color 2, 3-5s again back to color 1. ......more than 5s for low intensity, more than 5s again back to normal intensity. WHITE: connect White wires of all heads together for synchroniza on 48": 29 Flash Patterns (Form B) (ECE R65) (ECE R65) (ECE R65) (ECE R65) (ECE R65) (ECE R65) (ECE R65) (ECE R65) 48" Bar Wiring *2 types without junc on box *2 types with junc on box 4 or 5 wires directly When with 4 wires: Yellow: Flash pa ern selec on ......Apply Yellow to Red ......Less than 1 second for next pa ern ......1 to 3 second for previous pa ern ......3 to 5 seconds back to pa ern #1 When with 5 wires: Yellow: Flash pa ern selec on ......Apply Yellow to Red ......Less than 1 second for next pa ern ......1 to 3 second for previous pa ern ......3 to 5 seconds back to pa ern #1 Grey (Low power): constantly connect grey wire and red wire to posi ve, then the light bar will be Low power of flash pa ern. When disconnect grey wire to posi ve, it will be back to normal power. Blue: Synchroniza on After installation, check light bar to ensure it is securely mounted. Blue Grey (If have) Op on 2: With controller box directly (Standard) With junc on box: Low powerCorel PDF Engine Version 18.0.0.448