Brewista Smart Brew™ Steeping Filter

Features

• Innovative twist shut-off lever allows for simple steeping
• Simple two-piece construction
• Easy to assemble and disassemble
• Ambidextrous design
• Durable BPA-free polypropylene
• Dishwasher safe ?️

Layout

The Brewista Smart Brew™ Steeping Filter consists of the following main components:

• Main Steeping Filter Body
• Compression Seal
• Shut-off Lever

Using the Twist Shut-off Lever

1. Holding the orange lever handle horizontally, insert the shut-off rod completely into the hole below the main gray handle. Be certain to insert it completely to prevent damaging the tabs on the end when the lever is turned.
2. To confirm that the shut-off rod is properly seated, rotate the orange handle vertically to lock it in place.
3. To remove the shut-off rod for cleaning, turn the orange lever horizontally and pull it out.
4. Rotate the orange lever handle 60° to the left or right to close the drip-through valve. ❌
5. Turn the orange handle to the vertical position to open the drip-through valve. ✔️

Brewing Pour-over Coffee

1. Place the Smart Brew™ Steeping Filter onto a server or mug into which the preheat water will be drained (ensure to use a vessel larger than 350 ml). Ensure that the orange lever is properly inserted and turned upright to open the drip-through valve. Place a basket-style filter into the Smart Brew™ Steeping Filter. Rinse the paper filter with hot water. Allow preheat water to drain completely and dispose of it.
2. Place the Smart Brew™ Steeping Filter on a level surface. Ensure that the orange lever is properly inserted and turned left or right (not upright) far enough to close the drip-through valve. Add 20 grams of coffee grounds. Pour 40 ml of hot water over the coffee grounds.
3. Begin timer. Allow coffee to bloom for 20 seconds. Add an additional 300 ml of water. After 1 minute 15 seconds, gently stir the coffee grounds.
4. Place the Brewista Smart Brew™ Steeping Filter on a mug or server (ensure to use a vessel larger than 350 ml). Hold on to the main gray body handle.
5. At 2 minutes 30 seconds, open the valve by rotating the orange handle vertically; it will lock into position.
6. Allow all coffee to drain into the mug or server. Remove the Smart Brew™ Steeping Filter. Enjoy perfect pour-over coffee, simply!