TMKB M1 Wireless Mouse Instruction Manual

Product Overview

The TMKB M1 is a versatile wireless mouse with multiple connectivity options and customizable features.

Key Components:

• Left Button
• Right Button
• Mouse Wheel (Middle Button)
• Forward Button
• Back Button
• DPI Adjustment Button (6 Adjustable DPI Levels)
• Mode Switch
• Type-C Interface
• Power & Light Switch
• 2.4GHz Receiver Storage Compartment

Note: Customizable buttons are supported by the mouse driver software.

Restore Factory Settings: Hold [Forward + Back + DPI Buttons] until lights flash 3 times. Post-reset DPI default: 1600, default lighting, cleared Bluetooth pairing (2.4G pairing kept), 1000Hz polling rate.

Connectivity: Wired, Bluetooth, and 2.4GHz

Power Activation

Slide the bottom power switch to ON or ECO mode (energy-saving mode with backlight off) before connecting.

Wired Connection

• Connect the Type-C end of the cable to the mouse and the USB end to your computer.
• Inserting the USB cable in Bluetooth/2.4G mode switches to wired mode and charges the mouse.

Bluetooth Pairing/Connection (BT1/BT2)

• Slide the mode switch to BT1/BT2.
• Press and hold [Back Button + Scroll Wheel] simultaneously for 3 seconds. The blue indicator flashes rapidly, indicating pairing mode.
• Enable computer Bluetooth and search for "TMKB M1" on your target device to pair.
• A solid blue light for 3 seconds indicates successful pairing. Failed pairing auto-cancels in 1 minute; restart forced pairing.
• Auto-reconnect: Wake from sleep/power-on with Bluetooth. A green light for 3 seconds indicates success. If failed, manually re-pair after 15 seconds.

2.4GHz Wireless Connection & Re-pairing

• Slide the bottom mode switch to 2.4G, then plug the 2.4G receiver into your computer.
• Auto-reconnect: Device reconnects automatically when waking from sleep or restarting in 2.4G mode. Success triggers a 3-second blue light; failed attempts require manual pairing after 15 seconds.
• 2.4GHz Re-pairing Steps: The mouse is paired at the factory for plug-and-play use. Manual reconnection is needed if the 2.4G connection fails. Hold [Back button + Mouse wheel] for 3 seconds until the indicator flashes green rapidly. Insert the 2.4G receiver into your computer. On success, the green light stays solid for 3 seconds, then resumes normal lighting. If failed, retry forced pairing after 1 minute.

RGB Backlight System

Basic Controls

• Light On/Off: ON: Steady Light Mode; ECO: Energy-saving Mode (lights off); OFF: Full Power Off.
• Switch Lighting Effects: Long press [Forward Button + Scroll Wheel] to cycle through effects.

Default Effect: Ambilight

Advanced Customization via Software

Adjustable Settings: Color (16.8 million RGB colors), Brightness (0-100%), Dynamic Speed (0-100%).

13 Preset Lighting Modes: Single Color Breathing, Rainbow Breathing, Solid Color, Streaming Light, Single LED Running Light, Comet Trailing Effect, Neon Lighting Mode, Ambilight, Flashing Mode, Star Trek Mode, Water Ripple Effect, Dynamic Color Dance, Reactive Mode (Monochrome Lighting Follows DPI Indicator).

DPI Quick Switch

Basic Operation

• Trigger: Short press the middle button (DPI button).
• Switching Mode: Cycles through 6 preset levels.
• Visual Feedback: Scroll wheel LED displays the corresponding color.

Preset DPI Levels & LED Colors

• 400 DPI - White
• 800 DPI - Cyan
• 1600 DPI - Blue (Default)
• 3200 DPI - Yellow
• 4800 DPI - Purple
• 6400 DPI - Red

Software Customization

Adjustment Range: 200-24,000 DPI. Customize preset DPI values and assign custom LED colors to each level.

Specifications

Basic Specifications

• Model: M1
• System Compatibility: Windows / macOS / Linux / Chrome OS (Requires USB HID 1.1 / Bluetooth 4.2 or higher)
• Connection Methods: Wired (Type-C) / 2.4GHz Wireless / Bluetooth 5.2 (Dual-Device Simultaneous Connection)
• Dimensions: 125 x 63 x 41 mm
• Weight: 90 ± 2 g (Excluding 2.4G Receiver)
• Feet Material: PTFE
• Port Type: USB Type-C
• Package List: M1 Mouse ×1, 2.4GHz Receiver ×1, USB-A → Type-C Charging Cable (1.5m Nylon Braided) ×1, User Manual ×1

Core Performance Parameters

Sensor Configuration

• Chip Type: Optical
• Tracking Speed: 300 IPS
• Acceleration: 35G
• DPI Range: 200-24,000 (Default: 1600 DPI)

Response Speed

• Polling Rate Adjustment Levels: 125/250/500/1000 Hz
• Wired Mode: Default 1000 Hz Polling Rate
• 2.4GHz Mode: Default 1000 Hz Polling Rate
• Bluetooth Mode: Default 125 Hz Polling Rate

Power & Battery

• Battery Capacity: 1000mAh Lithium Polymer Battery
• Charging Parameters: Input Voltage: 5V DC ± 5%, Charging Current: 1000mA (1A)
• Charging Protection: Auto-cut off when charging voltage > 6.1V or charging current > 2.5A
• Charging Indicator (Scroll Wheel LED): Charging: Solid red; Fully charged: Solid green; Low Battery Alert: <3.3V Red blinking; Auto-shut down: <3.0V
• Operating Endurance: ECO Mode (lights off): ~180 hours; Normal Mode (RGB on): ~48 hours

Sleep Mechanism

• Wired Mode: Sleep/Wake with PC.
• Wireless Mode: 1 min inactivity → Light sleep (wake by movement/click); 5 min → Deep sleep (wake by click only).

Note: Sleep duration can be configured through the driver.

Driver Setup Guide

1. Download Driver: Visit "www.kemove.com/support/" in your browser. Locate "TMKB M1" and click "Download".
2. Install Driver: Extract the driver ZIP file. Run the installer "TMKB M1.exe".
3. Using the Driver: Connect the mouse to your PC. Launch the driver software from the desktop. Customize settings as needed.

Note: The driver file is in .exe format and is only compatible with Windows systems. The driver is only functional in wired mode and unavailable in 2.4GHz wireless or Bluetooth modes.

Troubleshooting

Q: What should I do if there is no response when using the 2.4GHz receiver?

1. Ensure the connection mode switch on the bottom is set to 2.4G mode.
2. If unresolved, refer to the "3. 2.4GHz Wireless Connection" section for pairing and connection methods.
3. If still unresolved, press and hold [Forward button + Backward button + DPI button] to restore factory settings.

Q: What should I do if Bluetooth cannot be detected?

1. Ensure the connection mode switch on the bottom is set to BT mode.
2. If unresolved, refer to the "2. Bluetooth Pairing" section for Bluetooth connection and pairing methods.
3. If still unresolved, press and hold [Forward button + Backward button + DPI button] to restore factory settings.

Support

If you have any problems or need assistance related to this product, please feel free to contact KEMOVE customer service.

Email: customer@kemove.com

Website: www.kemove.com

Discord Group: Scan the QR code to learn more about mouse driver operations and view related content.

Environmental Compliance

• Operating Temperature: 0~45°C (32~113°F)
• Humidity Range: ≤85% RH