Toro TimeCutter Max & MyRIDE 54in Zero Turn Riding Mower

Introduction

This operator's manual provides essential information for the safe and effective operation and maintenance of the Toro TimeCutter Max and MyRIDE 54-inch Zero Turn Riding Mower. Designed for homeowners, this mower is intended for cutting grass on well-maintained lawns.

It is crucial to read and understand all instructions and warnings within this manual and on the machine itself to prevent serious injury or damage. The manual covers various aspects including safety precautions, product overview, operation procedures, maintenance schedules, troubleshooting, and storage guidelines.

Getting Help

For product safety information, operation training materials, accessory details, or to locate a dealer and register your product, visit www.Toro.com.

When service, genuine Toro parts, or further information is required, contact an Authorized Service Dealer or Toro Customer Service. Ensure you have the model and serial numbers of your product readily available. These numbers are typically found on the serial plate of the machine.

Important: If your mobile device is equipped, you can scan the QR code on the serial number decal to access warranty, parts, and other product information.

Manual Conventions & Safety

This manual uses specific conventions to highlight potential hazards and provide important information. Safety alert symbols are used to signal hazards that could lead to serious injury or death if precautions are not followed. Key terms like DANGER, WARNING, and CAUTION are used to classify the severity of potential hazards.

DANGER indicates an imminently hazardous situation that will result in death or serious injury if not avoided.

WARNING indicates a potentially hazardous situation that could result in death or serious injury if not avoided.

CAUTION indicates a potentially hazardous situation that, if not avoided, may result in minor or moderate injury.

The manual also highlights important mechanical information and general notes for special attention.

Key Operational and Safety Features

• Intended Use: For homeowners in residential settings, primarily for cutting grass on well-maintained lawns.
• Safety Decals: Located on the machine to alert operators to potential dangers, including thrown object hazards, cutting hazards, and entanglement hazards. It is essential to replace any damaged or missing decals.
• Slope Operation: The maximum recommended slope for operation is 15 degrees. A slope indicator chart is provided to help determine the degree of slope before operating.
• California Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.