Link: The wallet designed for the internet
TP-Link - Contact Technical Support
How to set up an IPv6 Internet connection on the TP-Link Wi-Fi RoutersQ&A for TP-Link Matter-enabled devices
Owner's Manual for tp-link models including: 7106511525 Matter Enabled Device, 7106511525, Matter Enabled Device, Enabled Device, Device
Support | Tapo
17 hours ago — The development of Matter is ongoing, with progress varying across platforms. Device performance and bugs can occur unrelated to the device itself.
15 hours ago — Connect your device to the same network as your controller. 4. Follow the instructions in the app to complete setup. • Restart: Try turning off and then turning ...
File Info : application/pdf, 2 Pages, 166.33KB
DocumentDocumentThe development of Matter is ongoing, with progress varying across platforms. Device performance and bugs can occur unrelated to the device itself. TP-Link, along with other CSA members, is committed to enhancing user experiences and service quality. Our expert Technical Support team is ready to assist you. Please don't hesitate to reach out with any questions. Your feedback is vital to us! EMAIL support.usa@tp-link.com CALL +1 866 225 8139 (Toll Free) CHAT https://livechat.tp-link.com/us/smart/ 7106511525 REV1.3.0 ©2024 TP-Link Matter FAQ Visit https://www.tp-link.com/support/faq/3520/ Scan QR Code SeSteutpupViVdiedoesos MMatatettresresteutpupfofroAr mAmazaoznoAn lAexleax, aA, pAppleple HoHmome,eG, oGoogoleglHe oHmome,ea,nadndSmSmaratTrthTinhginsgs TrToruobulbelsehsohootointigng&&HHeleplp You can set up your TP-Link Matter-enabled device with any Matter-enabled app, not just TP-Link Tapo. Follow the instructions below to configure your Matter products. Before You Start · Get a Matter Controller: This is needed to connect and manage Matter devices on your home network. For instance, Apple TV and HomePod are examples of Matter controllers. Note: For iOS 18 and above, using a controller is optional. However, with a controller, you can fully enjoy remote control, automation, and other advanced features. · Reset Your Device: It's important to start with a fresh device. Here's how: Turn the light switch off and on five times, with a 1-second pause between each action. · Access Matter Setup Mode: This mode turns off 15 minutes after the device is powered up. To return to setup, simply turn your device off and then back on. · Locate Your Matter Code: Look for a QR code or a numeric code on your device or in its packaging. Snap a picture of it for future reference. (for demonstration only) How to Set Up *Setup processes may vary between different apps. 1. Turn on Bluetooth on your phone. 2. Open the smart home app, and either scan the Matter QR code or input the given numeric code. 3. Connect your device to the same network as your controller. 4. Follow the instructions in the app to complete setup. Failed to Set Up? · Restart: Try turning off and then turning back on your device, controller, or phone. · Check IPv6: Ensure that IPv6 is activated on your router. Visit our FAQ for step-by-step guidance: https://www.tp-link.com/support/faq/1525/ · Regarding the Matter Code: The original Matter code can only be used for setup in one app (you can reuse it after a device reset). If you wish to set it up in multiple apps, generate a new code using the first app for all subsequent ones.