Big Green Egg Expansion Cabinet Assembly Instructions
This document provides instructions for assembling the Big Green Egg Expansion Cabinet.
Parts List and Hardware
The following parts and hardware are included:
- Hardware: AA (12x), FF (21x), CC (20x), J (6x), E (4x), DD (1x)
- Cabinet Components: A, Q, R, S (2x), U, V, T, H
Refer to the diagrams for visual identification of parts.
Assembly Steps
Step 1
Attach component R to component A using 8x AA screws and 4x DD screws. Ensure the orientation is correct as shown in the diagram.
Attach component Q to the assembled A/R structure using 4x screws.
Step 2
Attach component E to component Q using 4x screws. Ensure the orientation is correct.
Step 3
Step 3a: Attach component A to the main cabinet structure using 2x screws. Ensure proper alignment.
Step 3b: Attach component R to the main cabinet structure using 4x screws.
Step 4
Attach components S (2x) to the sides of the cabinet using 8x FF screws. Ensure they are flush with the edges.
Step 5
Attach component T to the top of the cabinet using 4x AA screws. Then, attach component U to the top using 4x screws.
Step 6
Step 6a: Attach component U to the top shelf using 4x screws.
Step 6b: Attach component R to the shelf using screws.
Step 6c: Attach component V to the shelf using screws.
Resources
For assembly videos, visit: www.biggreenegg.com/assembly-videos
For safety tips, visit: www.biggreenegg.com/safetytips
Additional Big Green Egg websites:







