Livington CHILLTOWER TURBO

Replacement Filter & Cleaning Instructions

This document provides essential information for maintaining your Livington CHILLTOWER TURBO air cooler, focusing on filter replacement and cleaning procedures.

Filter Replacement (#1)

Procedure: To remove the filter, detach the front grille by pressing the tab at the top downwards. Set the grille aside. Grip the filter at the recess at the top with a finger and pull it out.

Recommendation: For optimal performance, clean the device and filter weekly. Replace the filter every 3-6 months.

Filter Cleaning (#2+3)

Dishwasher Method: Place the filter in the upper basket of the dishwasher and start a normal wash cycle. Remove the filter and allow it to dry completely in the air.

Hand Wash Method: Gently wash by hand with warm water and mild dish soap. Shake out excess water and allow it to dry completely in the air.

Important Cleaning Note

Caution: If mold or a musty odor is detected, cease use immediately. Clean or replace the filter thoroughly. Immerse the filter completely in a pot or bowl filled with equal parts clean water and white vinegar. Allow it to soak for 45-60 minutes. Rinse with warm water, shake out excess water, and let it dry completely in the air.

Scope of Delivery

1 x Livington CHILLTower TURBO Replacement Filter

Origin

Made in China

Importer Information

• CH: MediaShop Schweiz AG | Leuholz 14 | 8855 Wangen | Switzerland
• EU: MediaShop GmbH | Schneiderstraße 1, Top 1 | 2620 Neunkirchen | Austria

Customer Service Hotlines:
DE | AT | CH: 0800 376 36 06 (Free Service Hotline)
ROW: +423 388 18 00
HU: + 36 96 961 000

Contact:
Email: office@mediashop-group.com
Website: www.mediashop.tv

Document Details: Date: 03/2022 | Model: M33300