Pizza Oven Instruction Manual
Warnings and Cautions
ATTENTION! This product is intended FOR OUTDOOR USE ONLY. DO NOT use indoors.
- ALWAYS keep children and pets at a safe distance from the oven when in use.
- NEVER leave a burning fire unattended.
- DANGER of carbon monoxide poisoning - NEVER light this product or let it smoulder or cool down in confined spaces.
- DO NOT use this product in a tent, caravan, car, cellar, loft, or boat.
- DO NOT use under any awnings, parasols, or gazebos.
- FIRE HAZARD - Hot embers may emit while in use.
- CAUTION - DO NOT use petrol, white spirit, lighter fluid, alcohol, or other similar chemicals for lighting or relighting.
It is highly recommended that you use lump charcoal in your Kamado. It burns for longer and produces less ash, which can restrict airflow. DO NOT use coal in this product.
ATTENTION: This product will become very hot. DO NOT move it during operation. Allow the unit to cool down completely before moving or storing.
Always inspect the unit prior to use for fatigue and damage and replace as and when necessary.
Part List
The following parts are included with your pizza oven:
- Part 1
- Part 2
- Part 3
- Part 4
- Part 5 (Cooking Grill - Smooth iron plate)
- Part 6
- Part 7 (Charcoal Grill - Rough iron plate)
- Part 8
- Part 9
- Part 10
- Part 11
- Part 12
- Part 13
- Part 14
- Part 15
Refer to the diagrams for visual identification of each part.
Assembly and Usage Diagrams
Please refer to the provided diagrams for assembly instructions and usage guidance. The diagrams illustrate the correct placement and connection of various components, including the cooking grill (Part 5) and charcoal grill (Part 7).
Diagram 1: Shows the overall assembly of the oven with parts 1 through 15 indicated.
Diagram 2: Illustrates the placement of the charcoal grill (Part 7) and cooking grill (Part 5) within the main body of the oven.
Diagram 3: Depicts the arrangement of components, highlighting parts 9, 10, 2, 13, and 14.
Diagram 4: Shows the placement of parts 5 and 11.
Diagram 5: Illustrates the arrangement of parts 6 and 12, with connections labeled C and D.
Diagram 6: Shows the placement of parts 7 and 8, with connections labeled A.
Diagram 7: Depicts the final assembly with parts 1, 2, and 9, with connections labeled A.
