Philips Lighting

Lampes MASTER LEDspot Value GU10 DIM

MAS LED spot VLE D 3.7–35W GU10 927 60D

The MASTER LEDspot GU10 range allows for reduced energy consumption and maintenance costs without compromising light quality.

Safety Information and Warnings

• Operating temperature range: -20° C to 45° C ambient.
• For use only in dry or damp locations and in most open fixtures with lamp-holders that offer sufficient space (10 mm free air space).
• Not intended for use with emergency light fixtures or exit lights.

Product Data

General Information

Technical Lighting Data

Functioning and Electrical

Equivalence

Temperature

Controls and Dimming

Mechanical and Housing

Approval and Application

Application Conditions

Product Data

Dimensional Diagram

The diagram shows a PAR16 lamp shape with dimensions labeled 'D' and 'C'.

Photometric Data

Spectral Power Distribution Colour: The graph shows intensity in percentage versus wavelength in nanometers (nm), illustrating the spectral output of the light. The peak intensity is within the yellow-red spectrum.

Accent Lighting - Spots: This section likely refers to application suitability for accent lighting, with a product code and wattage mentioned.

Light Distribution Diagram: This polar diagram illustrates the luminous intensity distribution of the lamp. The beam is concentrated forward, with a main lobe extending from 0 to 60 degrees.

Lifetime

Life Expectancy Diagram: This graph plots the failure rate in percentage against time in hours. It shows a gradual increase in failure rate over time, reaching approximately 20% failure at 25,000 hours.

Lumen Maintenance Diagram: This graph shows the lumen output in percentage against burning hours. It indicates that the lumen output remains high, above 70%, even after 50,000 burning hours.