1.86mm Indoor LED Display Unit
MW7718-MIS-H1
Features
- Flexible PCB board circuit design.
- Lightweight and ultra-thin with excellent flexibility.
- Module aspect ratio of 2:1, central bending curvature of 150°, and easy installation flexibility.
- Magnetic adhesion allows precise adjustment of the planarity between module connections.
- No granular appearance, good color uniformity, and no mosaic effect.
- Capable of displaying on any area with a wide viewing range, soft display images, and high pixel density.
- Multi-layer PCB structure design for even current distribution, low power consumption, fast heat dissipation, and high reliability.
- Front-accessible installation and removal, with module support for front/back maintenance.
- High-brightness matte black LED beads with high contrast, reliability, excellent mixing performance, and low attenuation.
- Supports point-by-point brightness and color correction for overall consistency and uniformity in display units.
Specifications
| Parameter | Value |
|---|---|
| Model | MW7718-MIS-H1 |
| Module | |
| Pixel Pitch | P1.86 |
| Module Resolution (W × H) | 172 × 86 |
| Module Dimensions (mm) | 320 × 160 × 7.5 |
| Signal Source Interface | HUB75 |
| Processing Image Single Pixel Brightness Correction | Support |
| Single Pixel Color Correction | Support |
| Brightness (nits) | 600 |
| Color Temperature (K) | 2000 to 12000 adjustable |
| Viewing Angle (H/V) | 160°/140° |
| Center Distance Deviation of LED | < 3% |
| Brightness Uniformity | ≥ 95% |
| Color Uniformity (Cx, Cy) | ±0.003 |
| Contrast Ratio | 3000: 1 |
| Pixel Density (pitch/m²) | 288906 |
| Surface Evenness (mm) | ≤ 0.2 |
| Grayscale (bit) | 14 |
| Scanning Mode (S) | 43 |
| Drive Mode | Constant current driving |
| Refresh Rate (Hz) | 3840 |
| Power Supply | DC 4.5 V |
| Average Power Consumption (W) | 150 |
| Max. Power Consumption (W/m²) | 450 |
| Curvature | ≥ 150° |
| Ingress Protection | IP30 |
| Weight (kg/pcs) | 0.3 |
| Operating Temperature | -10°C to 40°C |
| Operating Humidity | 10% to 80% RH, non-condensing |
| Storage Temperature | -20°C to 50°C |
| Storage Humidity | 10% to 60% RH, non-condensing |
| LED Lifetime (h) | 50000 |
Dimensions
The module dimensions are 320 mm (width) × 160 mm (height) × 7.5 mm (depth). A diagram illustrates the overall width of 320 mm and height of 160 mm, with internal measurements and connection points detailed. Another diagram shows the side profile, indicating the 7.5 mm depth and internal layer thicknesses of 5.8 mm and 0.2 mm.
Ordering Information
| Product Model | Description |
|---|---|
| MW7718-MIS-H1 | 1.86mm Indoor LED Display Unit |
Company Information
Company: Zhejiang Uniview Technologies Co., Ltd.
Website: http://www.uniview.com
Email: overseasbusiness@uniview.com, globalsupport@uniview.com
Address: No. 369, Xietong Road, Xixing Sub-district, Binjiang District, Hangzhou City, 310051, Zhejiang Province, China
©2023-2025 Zhejiang Uniview Technologies Co., Ltd. All rights reserved.
Product specifications and availability are subject to change without notice. Uniview cannot be held responsible for any technical or typographical errors.
