User Manual for Phrozen Technology models including: DC 12V Sonic Resin 3D Printer Manufacturer, DC 12V, Sonic Resin 3D Printer Manufacturer, 3D Printer Manufacturer, Printer Manufacturer, Manufacturer
Manual | Phrozen Technology: Resin 3D Printer Manufacturer CH EN ❮
使用手冊
DC 12V3A
01
12 34
02
2
2
:PVUVCF
."%803,4 :PVUVCF
Ultrasonic Cutter User Manual
Product Specifications Power Requirement DC 12V ; 3A
01 Step-by-Step Instructions
12 34
02Operating Manual
Power Light
After the power is plugged in, the Power Light will light up automatically.
Power Button
Machine Status Indicator Light
Green LightxMachine is working properly.
Blue LightxUltrasonic knife is in use.
To turn off the power button, please long press for 2 seconds.
Shaft
Rotate the shaft to adjust the angle of the Ultrasonic Knife.
Machine Status
When the tool is in use, the blue indicator light will light up.
Ultrasonic Switch
When in use, this button must be held down. If pressed for more than 2 min, the tool will stop working automatically.
Ultrasonic Blade
Please use carefully to avoid cutting and/or hurting yourself.
Key Notes Before You Start
Please DO NOT touch the product with wet hands.
Please wear cut-resistant gloves when handling the product.
DO NOT expose the machine to liquids of any kind.
If The device is exposed to water, discontinue use immediately.
Please do not use this product to cut oil paper and/or any other flammable objects.
DO NOT point the Ultrasonic Knife at others. Keep away from children. Please DO NOT use this product to cut metal
or glass. DO NOT touch the blade immediately before
or after use as high temperatures can cause burns. Danger - High Voltage! Non-professional personnel should avoid dissassembling the product on their own to prevent injury from accidental touch.
cMacinctecncanccec:Please use sanitizing alcohol to clean the exterior of the device. Do not use any oily or corrosive liquids to clean the device.
$VTUPNFS 4FSWJDF
'BDFCPPL
:PVUVCF
*OTUBHSBN
Adobe PDF library 17.00 Adobe Illustrator 28.1 (Windows)