Salter Metallics Hand Blender

Introduction

This document provides instructions and specifications for the Salter Metallics Hand Blender, designed for practical and stylish everyday use. It features a 400W motor, two speed settings, and a detachable stainless steel rod and blade for easy cleaning.

The appliance is intended for domestic use only and is not suitable for commercial purposes.

Safety Instructions

When using electrical appliances, basic safety precautions should always be followed:

• Ensure the voltage on the rating plate matches your local mains supply.
• Children aged 8 years and above, and individuals with reduced physical, sensory, or mental capabilities, may use this appliance if given supervision or instruction for safe use and understanding of the hazards.
• Children should be supervised to ensure they do not play with the appliance.
• Cleaning and user maintenance should not be performed by children unless they are over 8 and supervised.
• This appliance is not a toy and contains no user-serviceable parts. Repairs should only be carried out by qualified electricians.
• Keep the appliance and its power cord out of reach of children, especially when in use or cooling down.
• Keep the appliance and cord away from heat or sharp edges.
• Keep away from other heat-emitting appliances.
• Keep hands, fingers, hair, and loose clothing away from rotating tools.
• Do not immerse electrical components in water or other liquids.
• Do not operate with wet hands.
• Do not leave the appliance unattended while connected to the mains.
• To disconnect, switch off and remove the plug by hand, do not pull the cord.
• Do not pull or carry the appliance by its power cord.
• Do not use if dropped, damaged, or leaking.
• Use only for its intended purpose and with supplied accessories.
• Do not use outdoors.
• Do not store in direct sunlight or high humidity.
• Do not place in boiling hot water or very hot liquid.
• Do not touch moving parts during use.
• Do not touch hot sections of the appliance during use.
• Do not use broken or loose blades.
• Switch off and disconnect from mains before changing accessories.
• Always unplug after use and before cleaning.
• Ensure the appliance has cooled fully before cleaning or maintenance.
• Use on a stable, heat-resistant surface at a comfortable height.
• Use of an extension cord is not recommended.
• Do not operate via external timers or remote control systems unless supplied.
• Do not use the blender attachment to blend very hot or boiling liquid, as this may cause injury.

Care and Maintenance

Warning: Do not touch sharp blades.

1. Switch off and unplug the blender from the mains power supply before cleaning or maintenance.
2. Wipe the blender motor unit with a soft, damp cloth and allow to dry thoroughly.
3. Wash all accessories in warm, soapy water, then rinse and dry thoroughly.
4. Use extreme caution when cleaning blades; use a brush and dry carefully.
5. Do not immerse the blender motor unit in water or any other liquid.
6. Do not use harsh or abrasive detergents or scourers.
7. The blender is not suitable for use in a dishwasher.
8. Clean the blender after each use.

Warning: Handle attachments with care as blades are sharp. Exercise caution when attaching, removing, cleaning, or storing attachments.

Getting Started

1. Remove the appliance and packaging from the box.
2. Place packaging inside the box for storage or disposal.

In the Box

• Hand Blender motor unit
• Blender attachment
• Instruction manual

Features

• 400 W power
• 2 speed settings
• Stainless steel rod and blade
• Detachable design for easy cleaning

Description of Parts

The hand blender consists of the following main parts:

• 1. Hand Blender motor unit: The main body containing the motor and controls.
• 2. Power button: Used to activate the blender at a selected speed.
• 3. Turbo button: Provides a burst of maximum power.
• 4. Blender attachment: The detachable foot with stainless steel blades that processes food.

(Note: A diagram in the original document illustrates these parts on the appliance.)

Instructions for Use

Before First Use

• Wash the blender attachment in warm, soapy water, rinse, and dry thoroughly.
• Wipe the blender motor unit with a soft, damp cloth and dry thoroughly.
• Never touch the blades; clean them with a brush and dry carefully.
• Do not immerse the blender motor unit in water or any other liquid.

Note: A slight odour may be emitted on first use, which is normal and will subside. Ensure adequate ventilation.

Using the Hand Blender

Ensure the blender attachment is securely fitted before use. Do not attempt to remove it until it has stopped moving.

1. Before connecting to the mains, fit the blender attachment to the motor unit by aligning the tabs and twisting into place.
2. Place the food to be blended into a suitable bowl.
3. Plug in and switch on the blender at the mains power supply.
4. Hold the bowl steady, place the blade attachment into the food, then press and hold the desired speed button on the motor unit.
5. Once blending is complete, release the speed button and wait for the blade to stop rotating before removing the blender from the food.

Caution: Switch off and unplug the blender before adding or removing food.

Warning: Do not operate the blender without food, as this can cause damage.

Switch off and unplug before removing the attachment or cleaning.

Maximum constant operation time is 20 seconds. Allow to cool for 2 minutes before subsequent use.

Troubleshooting

Storage

• Reassemble the blender.
• Ensure the blender is cool, clean, and dry before storing in a cool, dry place.
• Do not wrap the cord tightly around the blender; wrap it loosely to avoid damage.

Specifications

• Product code: EK3102TITANIUM
• Input: 220-240 V~50/60 Hz
• Output: 400 W

Connection to the Mains

Please check that the voltage indicated on the product corresponds with your supply voltage.

Important: The wire colours in the mains lead may not correspond with terminal markings in your plug. Follow these instructions:

• Blue wire (Neutral): Connect to the terminal marked 'N' or coloured BLACK.
• Brown wire (Live): Connect to the terminal marked 'L' or coloured RED.
• Never connect either the brown or blue wire to the EARTH terminal (symbol ⏚).

Ensure the cord grip is fastened correctly. The plug must be fitted with a fuse of the same rating, conforming to BS 1362 and be ASTA approved.

If in doubt, consult a qualified electrician.

Non-Rewireable Mains Plug: If replacing the fuse in a non-rewireable plug, use an ASTA approved fuse of the same rating.

To remove a non-rewireable plug: DISCONNECT FROM THE MAINS, cut the cord, and dispose of the plug safely. Never reuse or insert it into a socket.

Guarantee and Support

UP Global Sourcing UK Ltd., Victoria Street, Manchester OL9 ODD, UK.

For product issues, contact Customer Services:

• Telephone: 0161 934 2240 (Mon-Fri, 9 am–5 pm)
• Email: customercare@upgs.com
• Fax: 0161 628 2126

Return products to the retailer with your receipt, subject to their terms and conditions.

Salter provides a standard 12-month manufacturer's guarantee from the date of purchase, provided the product is used as instructed for its intended domestic use. Misuse or dismantling invalidates the guarantee.

The guarantee covers repair or replacement of defective parts. Damages from wear and tear, consumables (plugs, fuses) are not covered.

Terms and conditions may be updated; check the website periodically. This guarantee does not affect your statutory rights.

The crossed-out wheelie bin symbol ♻️ indicates that this appliance should be disposed of in an environmentally friendly way. Contact your local authority for recycling details.

CE marking is present on the product.

Extended Guarantee and Social Media

To be eligible for an extended guarantee, register your product within 30 days of purchase at www.saltercookshop.com.

Find Salter on Facebook: www.facebook.com/SalterCookshop.

Manufacturer Information

Manufactured by: UP Global Sourcing UK Ltd., Victoria Street, Manchester OL9 ODD, UK.

Made in China.