HONBIKE HF01 Electric Folding Bicycle Owner's Manual

IMPORTANT

This manual contains important information regarding the safe operation and maintenance of your bicycle. Read all sections before you ride your new Honbike, and carefully follow the instructions. If you have any questions or do not understand something in this manual, take responsibility for your safety and consult Honbike. Keep your owner's manual and any other documents that came with your Honbike for future reference. All content in this update and the manual is subject to change or withdrawal without notice. Visit www.honbike.com to view and download the latest version. Honbike makes every effort to ensure the accuracy of its documentation and assumes no responsibility or liability if any errors or inaccuracies appear within. This manual is not intended as a comprehensive use, service, repair or maintenance guide.

WARNING

Riding any type of bicycle involves risks which can't be predicted or avoided and that are the sole responsibility of the rider. This manual makes no representations about the safe use of bicycles under all conditions. Off road riding, jumping or acrobatic tricks can cause frame damage which may result in death or serious injury of the rider. It is the sole responsibility of the rider to become properly educated and prepared to ride safely.

Symbols Used in this Manual

Pay particular attention to the following symbols:

• WARNING: ⚠️ Indicates a potentially dangerous situation that, if not avoided, could result in injury or death.
• CAUTION: ❗ Indicates a potentially dangerous situation that, if not avoided, could result in damage to the bicycle or the voiding of your warranty.
• SAFETY INSTRUCTION: ℹ️ Indicates specific safety instructions or procedures on how to handle the product, or refers to the section of the operating instructions that deserves your special attention.

You can visit Honbike website or Honbike official APP to get more information about the product and after-sales support. Please search www.honbike.com or scan the QR code to download the APP.

Table of Contents

What's in the Box

The following items are included with your Honbike:

• Folding bicycle * 1
• Rear wheel * 1
• Saddle & Seat Post set * 1
• Rear fender * 1
• Battery * 1
• Frame strap * 1

Accessories & Tools

Included accessories and tools:

• Rear wheel bolt cover * 1
• Folding pedal * 2
• Charger & cable * 1
• Battery key * 4
• M5 bolts (9 pcs)
• M6 bolts (5 pcs)
• Hex Key set (#2.5, #4, #6)
• Rear and Front Reflectors
• Owner's Manual (EN, FR, DE)
• Quick Start Guide

Note: After unpacking, please take all items out of the package and make sure that everything listed above is included. If anything is missing or damaged, please contact Honbike immediately for assistance.

Bicycle Components

The Honbike HF01 features the following components:

• 1. Front Fork
• 2. Motor
• 3. Disc Brake
• 4. Front Light/Reflector
• 5. Brake Lever
• 6. Display
• 7. Stem
• 8. Stem Hinge
• 9. Head Tube
• 10. Frame
• 11. Frame Hinge
• 12. Seat
• 13. Seat Post Lock
• 14. Seat Tube
• 15. Battery
• 16. Folding Stand
• 17. Crank
• 18. Folding Pedal
• 19. Drive Shaft
• 20. Kickstand
• 21. Rear Fender
• 22. Rear Light/Reflector

Key Features

• Honbike Patented Drive Shaft: Features a fully enclosed drivetrain for easy maintenance.
• Handlebar Integrated Display: Equipped with an LCD screen, built-in Bluetooth, and displays riding status.
• 250W Front Hub Motor: Lightweight, highly efficient motor with a high reduction ratio of 14:1.
• Removable Battery: Lightweight and supports ON/OFF bicycle charging.
• Brake System: Front & Rear disc brakes for reliable stopping power.
• Foldable Design: Folds quickly in 15 seconds for compact size and easy storage.

Frame Number

The frame number is typically located on the Head Tube. Example: 24872XXXXXXXXXX.

Unboxing Instructions

Visit www.honbike.com to view corresponding videos for correct installation and usage of the HF01. Honbike packaging is designed for safe transportation of the electric bicycle. It is recommended to keep the original packaging for at least one month for potential service or maintenance needs.

Note: Please assemble the bicycle on a smooth indoor surface or carpet to avoid scratching it.

1. Open the carton carefully and try not to damage it.
2. Take out the accessory box, battery, and saddle kit separately and set them aside for later use.
3. Take out the upper foam to assist bicycle assembly.
4. Take out the rear fender.
5. Lift the bicycle with one hand while carefully removing the rear wheel with the other hand to avoid scratching the paint.
6. Take the bicycle out of the carton, unfold the bicycle frame clockwise, and place it on the foam.
7. Use your palm or thumb to push the frame hinge towards the bicycle body until hearing a "click", indicating the frame hinge is locked. Keep fingers out of the frame hinge area.
8. Lay the bicycle onto the foam.

Mount the Rear Wheel & Rear Fender

1. Place the unpainted side of the center of the rear wheel onto the bicycle.
2. Loosely tighten the five M6 bolts to the rear wheel using Hex key #4. Then, firmly tighten each bolt alternating in a diagonal order until all bolts are securely tightened. Note: Failure to tighten the bolts in diagonal order can lead to an untrue wheel.
3. Snap on the rear wheel bolt cover.
4. Install the bolt on the front side of the rear fender to the drive shaft (M5*1, 4-6Nm).
5. Run the rear light cable through the cable guide by moving the brake cable aside and threading it through. You can also use Hex key #2.5 to unscrew the bolt on the cable guide first.
6. Align the rear light cable arrows and connect the ends together. Tuck the cable into the bottom of the battery case as far as possible.
7. Stand the whole bicycle up and lower the kickstand.
8. Install the two bolts of the rear fender stay using Hex key #4 (M5*2, 4-6Nm).

Lifting the Stem

Remove the straps and foam packaging from the stem, crank, and frame.

1. Flip the stem upward to the vertical position, paying attention to the brake cables. Pull the hinge clamp downward to its lowest point and continue to push the stem to the vertical position.
2. Lift the hinge clamp up.
3. Firmly press the hinge clamp until hearing a "click", indicating that the hinge clamp is locked in place. Note: Keep fingers out of the hinge clamp area.

Install Folding Pedal

Right Pedal (R): Screw it clockwise onto the crank by hand. Use hex key #6 to tighten it clockwise.

Left Pedal (L): Screw it anticlockwise onto the crank by hand. Use hex key #6 to tighten it anticlockwise.

Note: Apply some anti-rust oil or grease on the pedal threads if necessary.

How to Fold/Unfold the Pedal

To Fold the Pedal:

1. Place both thumbs on the crank with all other fingers on the end of the pedal.
2. Press the pedal toward the frame and then fold the pedal upward. Note: Fold the right pedal before folding the bicycle.

To Unfold the Pedal:

Push down on the folded part of the pedal with your palm until hearing a "click", indicating that the pedal has been unfolded in place.

Assemble the Saddle Kit

1. Put the saddle & seat post kit onto the frame.
2. Align the four holes on the seat post with the four holes on the frame.
3. Tighten the four bolts clockwise. Install the lower bolts on both sides first, and then install the upper two bolts (M5*4, 6-8 Nm).

Note: If you find paint wear at the bolt holes of the seat tube, it is because every Honbike HF01 is fully inspected for saddle kit assembly before shipping, and this is not a quality issue.

Saddle Height Adjustment

1. Turn the seat post lock clockwise.
2. Lift the saddle upward to the appropriate height.
3. Tighten the seat post lock counterclockwise until it is locked perpendicular to the ground.

When you see the "Minimum Insertion" warning mark, the saddle has been raised to its highest position.

How to Use the Folding Stand

• To Lower the Folding Stand: Pull the folding stand release inside the folding stand up to the end, then push the folding stand down until it stops.
• To Lift the Folding Stand: Pull the folding stand release inside the folding stand to the end, and gently lift the folding stand.

Note: If you push the folding stand without pulling the folding stand release to the end first, the folding stand may break.

Install the Battery

Insert the battery into its designated compartment and secure it according to the design. Ensure it is properly seated before use.

Folding and Unfolding Your Honbike

To Fold Your Honbike:

Follow the specific steps outlined on pages 17-19 of the manual to fold the bicycle, typically involving folding the stem, handlebars, and pedals, and securing the frame.

To Unfold Your Honbike:

Follow the specific steps outlined on pages 20-21 of the manual to unfold the bicycle, reversing the folding process to prepare it for riding.

Operation and Settings

Display Operations:

Navigate through various display modes to view speed, battery level, riding distance, and other status information using the handlebar controls.

Display Advanced Settings:

Access advanced settings via the display to customize parameters such as units, power modes, and Bluetooth connectivity.

Pedal Assist Level:

Adjust the level of electric assistance provided by the motor to match your riding preference and terrain. Higher levels offer more assistance.

Battery Management:

Charging the Battery: Connect the charger to the battery and a power outlet. Ensure the battery is fully charged before the first ride. Refer to page 27 for detailed charging instructions.

Removing the Battery: Follow the procedure to safely remove the battery for charging or storage. Refer to page 28.

Battery & Charger Safety Information: Always follow safety guidelines when charging and handling the battery and charger to prevent damage or hazards. Refer to page 29.

Riding Guidelines

Proper Frame Sizing:

Ensure the bicycle is properly sized for the rider for optimal comfort and control. Refer to page 30.

Intended Use:

This bicycle is designed for specific types of riding. Refer to page 31 for intended use details.

Road Conditions Suitable for this Model:

Understand the types of terrain and road conditions the Honbike HF01 is suitable for to ensure safe operation. Refer to page 31.

Maximum Permitted Overall Weight:

Adhere to the maximum weight limit for the rider and any cargo to maintain safety and prevent damage. Refer to page 32.

How to Increase Riding Mileage:

Tips and techniques to maximize the battery range and overall riding distance on a single charge. Refer to page 32.

Before the First Ride:

Perform essential checks and setup procedures before your initial ride. Refer to page 33.

Before Every Ride:

Conduct a pre-ride safety check to ensure the bicycle is in good working condition. Refer to page 35.

Safe Riding:

General safety advice for operating the electric bicycle. Refer to page 37.

Riding in Bad Weather Conditions:

Precautions and considerations for riding in rain, snow, or other adverse weather. Refer to page 38.

Riding in Low Light Conditions:

Tips for visibility and safety when riding at dawn, dusk, or night. Refer to page 38.

Maintenance and Care

Maintaining Your Honbike:

Regular maintenance is crucial for the longevity and performance of your electric bicycle. Refer to page 39.

Service Interval:

Recommended schedule for professional servicing to keep your Honbike in optimal condition. Refer to page 40.

Replacing Parts:

Information on how to replace common wear-and-tear parts. Refer to page 41.

Maintenance Notes:

General tips and reminders for keeping your Honbike well-maintained. Refer to page 41.

Warranty Information

Register Your Honbike:

Instructions on how to register your bicycle to activate warranty coverage. Refer to page 42.

Warranty Notes:

Details regarding the terms, conditions, and duration of the Honbike warranty. Refer to page 43.

Exclusions:

Specific conditions or damages that are not covered by the warranty. Refer to page 44.

Special Notes:

Any additional important information related to the warranty. Refer to page 44.

Legal and Compliance

Disclaimer:

Important legal statements and disclaimers from Honbike. Refer to page 45.

Declaration of Conformity:

Statement confirming the product meets relevant regulatory standards. Refer to page 45.

FCC Compliance Statement for USA:

Information regarding compliance with Federal Communications Commission regulations for the United States. Refer to page 45.

Prop 65 Warning:

California Proposition 65 warning, if applicable. Refer to page 46.

Liability Disclaimer:

Legal limitations of liability. Refer to page 46.

Legal:

General legal information. Refer to page 47.