KINGONE iPad Pencil
English Manual
Indicator Light Status
1. Green light: Normal operation.
2. Flashing green light: Indicates charging.
3. Flashing red light: Indicates the need for charging.
Power On
Press and hold for 3 seconds to power on. The indicator light will turn green, indicating normal operation.
Power-on status: Green light
Power Off
Press and hold for 3 seconds to power off. The indicator light will turn off.
If inactive for 5 minutes, the device will automatically power off. The indicator light will turn off.
Power-off state: All lights off
Charging Methods
Magnetic suction wireless charging: Attach to the iPad for wireless charging. The green light will breathe to indicate normal charging.
Type-C wired charging: Use a Type-C adapter for wired charging.
The stylus enters sleep mode, and the breathing light turns off after being fully charged for 15 minutes.
Bluetooth Connection
1. Press and hold for 3 seconds to power on. The indicator light will turn green, indicating it is turned on.
2. On your iPad, go to Settings and navigate to the Bluetooth menu. Enable Bluetooth and select "P12" to pair and establish a Bluetooth connection.
Visual description: A screenshot of iPad Bluetooth settings showing "P12" as a connected device under "My Devices".
Bluetooth Shortcuts
When the stylus is powered on and connected to Bluetooth with the green indicator light active, use the following shortcuts:
- Single click: Return to the home screen.
- Double click: Display multitasking view.
- Triple click: Take a screenshot of the current page.
How to Display Stylus Battery Level on iPad
1. Long press the "+" button in the top corner of the iPad screen to add a widget.
2. Select the battery widget from the available options. There are three modes to choose from.
Visual description: A display showing battery levels, with examples of 96% and 45%.
How to Change the Pen Tip
Rotate the pen tip to the left to remove the damaged tip. Replace it with a new one and rotate it to the right until it remains stationary for normal use.
Visual description: Two diagrams illustrating the process of removing and inserting a stylus tip.
Troubleshooting Common Issues
- Stylus cannot connect to Bluetooth: If the stylus powers on with a green light and can be used for writing but not connecting to Bluetooth, check iPad Bluetooth settings. If more than 5 devices are connected, ignore all Bluetooth devices, restart the stylus, and reconnect to "P12". This may be due to too many conflicting Bluetooth connections.
- Loose or rotating stylus tip: Replace the stylus tip with a new one and tighten it properly for normal usage.
-
Stylus not working:
- a. If the stylus powers on with a red light that quickly turns off, the battery is low and needs charging.
- b. If the stylus powers on without light, it may be in deep sleep mode. Connect the stylus directly to a Type-C adapter for wired charging. The indicator light will turn red and breathe, indicating normal charging. Charge for about 20 minutes before use.
-
Green light is on but unable to write:
- a. If you previously used an original stylus, go to Bluetooth settings and ignore its connection.
- b. Reinstall the provided stylus tip and try writing again.
-
Green light is on but there is a disconnect:
- a. Ensure the stylus tip is properly tightened. A broken tip can cause disconnects.
- b. Ensure the iPad screen is clean and free from oil or water.
- c. Check the thickness of the iPad screen protector, as a thick protector can affect the connection.
Product Specifications
| Model: | P12 |
| Size: | 165x8.9mm |
| Charging Method: | Type-C wired fast charging / iPad magnetic wireless charging |
| Charging Time: | Approximately 1 hour (wireless charging), approximately 20 minutes (wired charging) |
| Stylus Tip Size: | 1.7mm |
| Power Saving Mode: | Automatically enters sleep mode after 5 minutes of inactivity |
Compatible Devices
iPad Pro 12.9" (3rd/4th/5th/6th Gen): A1876, A2014, A1895, A1983, A2229, A2233, A2069, A2232, A2378, A2461, A2379, A2462, A2436, A2764, A2347, A2766
iPad Pro 11" (1st/2nd/3rd/4th Gen): A2013, A1934, A1979, A1980, A2228, A2231, A2068, A2030, A2377, A2459, A2301, A2460, A2435, A2761, A2762, A2759
iPad Air (4th/5th Gen): A2316, A2324, A2325, A2072, A2588, A2589, A2591
iPad Mini (6th Gen): A2567, A2568, A2569
Also compatible with models that support wireless charging.
How to check your iPad model: Go to Settings > General > About.
Important Note
- Only compatible with 2018/2019/2020/2021/2022 Apple iPad/iPad Pro/iPad Air/iPad mini models. Not compatible with iPhone, Android, Microsoft devices, and earlier versions of iPad.
- There is no magnetic wireless charging function on iPad 7th, 8th, 9th, 10th generation.
