ARCTAPE COB Tape, Static White

Product Overview

The ARCTAPE COB Tape is a 24V DC indoor-rated LED tape light available in Static White and Dim-to-Warm options. It provides a continuous band of flawless light output with no pixelated hot spots, even without a lens.

Key Features:

• Continuous band of flawless light output with no pixelated hot spots.
• Field-cuttable every 2 inches for shorter runs, with a maximum run of 32 ft 9 5/8 inches. Can be linked with connectors (sold separately).
• Easy installation to most surfaces using pre-attached 3M® double-sided tape.
• Available in Static White 2700K, 3000K, 4000K, or Dim-to-Warm (3000K-1800K).
• Compatible with 60W and 96W indoor or outdoor rated drivers (sold separately).
• 50,000-hour rated life, Title 24 Compliant, and 5-year limited warranty.

Performance Specifications

Accessories

2-Pin Indoor Connector Kits

12mm Wide Aluminum Channel Kits

Drivers

*Phase dimming compatible with most MLV, ELV, and TRIAC dimmers.

Technical Specifications

Construction

• Product Type: No-Pixel COB Tape Static White Damp Rated
• Width: 1/2 in
• Length: 32 ft 9 5/8 in
• Light Source: COB LED White
• Material Construction: Super flexible bending, ultra thin appearance, premium wall structure & thick copper to ensure consistency in voltage and brightness.
• Light Effect: Continuous band light output with no pixelated hot spots.
• Packaging: Recyclable cardboard reel packaged in anti-static paper bag.

Installation

• Field Cuttable Increment: Cuttable every 2 in
• Max Run Length: 32 ft 9 5/8 in
• Mounting: Easy installation to most surfaces by using pre-attached 3M® double-sided tape.

Electrical

• Dimmable: PWM Dimming Signal, dimmable down to 1% with LED Driver (sold separately).
• Input Voltage: 24V DC
• Input Current: 6 mA per Chip at 120V
• Operating Temperature: -4° to 113°F (-20° to 45°C)
• Storage Temperature: -4° to 140°F (-20° to 60°C)
• Flicker: Flicker Free – Pst LM<1, SVM<0.4, Percent Flicker≤5%@≤200Hz

LED Characteristics

• Chip Density: 128 chips/ft
• Beam Angle: 150°
• Color Temperature: 2700K, 3000K, 4000K, or Dim-to-warm (1800-3000K)
• Color Accuracy (CRI): 90
• R9 Value: High color performance with R9 greater than 50
• Color Consistency: 3 step in 1 bin

Compliance

• Safety Listing: UL Listed
• Environment: Suitable for use indoors in dry and damp environments.
• IP Rating: IP20
• California Title 24 JA8 Compliant: Can be used to conform with the requirements of California Title 24 Part 6.
• California Energy Commission (CEC) Status: Lawful for Sales in California
• NEC Compliant: Suitable for use in closets when used in an enclosed extrusion based on NFPA 70, NEC section 410.16 (A)(1) and 410.16 (C)(1)
• IESNA LM-79 & LM80 Testing: RAB LED luminaires and LED components have been tested by an independent laboratory in accordance with IESNA LM-79 and LM-80.
• RoHS: Mercury and UV free. RoHS-compliant components.
• FCC: Complies with Part 15 of the FCC Rules

Warranty

The RAB 5-year, limited warranty covers light output, driver performance and paint finish. RAB's warranty is subject to all terms and conditions found at rablighting.com/warranty.

Dimensions

TICYY, TICY, TICN

Weight: 0.453 lbs

Diagram Description: A diagram showing the dimensions of the ARCTAPE COB Tape. The tape itself is shown as a thin strip with a width of 1/2 inch. The overall length is indicated as 32 ft 9 5/8 inches. There are also callouts for 2 inches for cutting increments and 3/8 inch and 5/16 inch for other measurements.

TICY/DW

Weight: 0.453 lbs

Diagram Description: Similar to the TICYY, TICY, TICN dimensions, this diagram shows the tape with a width of 1/2 inch and a length of 32 ft 9 5/8 inches. It also includes measurements of 2 inches for cutting and 3/8 inch and 5/16 inch.

Ordering Info

Dimmer Compatibility List

LUTRON

LEVITON

Visit www.rablighting.com for periodic updates to this list or contact us at 888-722-1000 for questions or comments.

Ordering Matrix

* Dim-to-warm option only available on tunable white model. DW is for Indoor (COB usage) - Dim to 1800K.