Building a more Sustainable and Electrified World | nVent
Owner's Manual for nVent models including: CM24S Hammer On Flange Clip Bottom Mount with Retainer, CM24S, Hammer On Flange Clip Bottom Mount with Retainer, Flange Clip Bottom Mount with Retainer, Clip Bottom Mount with Retainer, Bottom Mount with Retainer, Mount with Retainer
File Info : application/pdf, 2 Pages, 216.73KB
DocumentDocumentHAMMER-ON FLANGE CLIP, BOTTOM MOUNT WITH RETAINER FEATURES Pre-riveted retainer strap is easily bent into position Requires only a hammer to install 4WN washer wing nut included SPECIFICATIONS Finish: Material: nVent CADDY Armour Spring Steel Catalog Number CM24S CM58S CM912S Flange Thickness(FT) 1/8" 1/4" 5/16" 1/2" 9/16" 3/4" Strap Length 8.5" 13" 13" Screw Length(L) 9/16" 9/16" 9/16" Screw Diameter(Sc) 1/4" 1/4" 1/4" Static Load(F) 75 lb 75 lb 75 lb DIAGRAMS WARNING nVent products shall be installed and used only as indicated in nVent's product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent's instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty. North America +1.800.753.9221 Option 1 Customer Care Option 2 Technical Support Europe Netherlands: +31 800-0200135 France: +33 800 901 793 Europe Germany: 800 1890272 Other Countries: +31 13 5835404 APAC Shanghai: + 86 21 2412 1618/19 Sydney: +61 2 9751 8500 Our powerful portfolio of brands: nVent.com CADDY ERICO HOFFMAN RAYCHEM SCHROFF TRACER © 2023 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of 2 their respective owners. nVent reserves the right to change specifications without notice.