HM-CATBOX Smart Cat Litter Box Instructions

1 Product Function Introduction

The HM-CATBOX is a fully automatic smart litter box designed to clean up cat waste automatically after the cat has finished using the toilet. It offers connectivity via the Home and Pet App, allowing users to set various modes (fully automatic, manual, night time), monitor litter levels, device status, and receive notifications. If not connected to the app, the device operates in full automatic mode by default. The device incorporates multiple safety features, including anti-pinching mechanisms and automatic stop when a cat enters, ensuring the safety of both the user and the pet.

Specifications

Machine Size

The machine height is 26 inches, with a width/diameter of 22 inches.

Packing List

• HM-CATBOX smart cat litter ×1
• Power adapter ×1
• Description ×1
• Cleaning brush ×1

2 Components and Required Instructions

Components

• ① Removable roller
• ② Removable curtain (optional)
• ③ Button
• ④ Storage drawer
• ⑤ Removable cover
• ⑥ Top cover bayonet
• ⑦ Power socket

Required Instructions

Please strictly adhere to the following regulations for normal operation and safety:

• The HM-CATBOX Smart Litter Box is suitable for cats weighing 2.2 Pounds and above, up to a recommended maximum of 33 Pounds.
• Use only the original power adapter to prevent unit damage or fire hazards.
• Place the machine on a dry, flat, and sturdy surface. Avoid soft surfaces like carpets or yoga mats, as they may impede proper operation.
• Do not dismantle or tip the machine while it is in operation.
• Disconnect the machine from the power supply before removing any parts.
• Do not stack objects on the machine, as this may affect its operation.
• Never insert hands into the drum mechanism while the machine is operating.
• Avoid switching between cleaning and emptying tasks without completing the current task.

3 Quick Start

Follow these steps for quick setup and use. If you do not connect to the network, the device defaults to full automatic mode.

1. Ensure the equipment is properly installed on a solid, flat surface with no obstructions.
2. Download the "Home and Pet" app from your phone's app store or by scanning the provided QR code [QR Code for App Download].
3. Open the app, register an account, log in, and follow the on-screen instructions to add and bind the equipment.
4. After binding, pour cat litter (maximum 6 L) into the drum bin. Re-power the device (unplug for 15 seconds, then plug back in).
5. You can now access the device control page via the app and start using the smart litter box in automatic mode.

For detailed configuration or further assistance, refer to the subsequent sections.

4 Operation Introduction

4.1 Connection APP

To utilize all features, configure the network for the equipment. The smart cat litter can connect via WiFi for remote control and viewing through the app.

Download the "Have a Favorite" app (search or scan QR code). After installation, prepare for network configuration.

Ensure the equipment is placed on a flat, solid ground, with its four support feet making proper contact. Avoid soft surfaces.

Before starting, ensure the device is powered off and all covers/drawers are correctly installed with no sundries inside.

Steps for Network Configuration:

1. Device Binding: Press and hold the button on the front of the device, then plug in the power supply. Release the button when you hear two beeps. Follow app prompts.
2. WiFi Setup: Switch your phone's WiFi to the network broadcast by the device (typically starting with 'yjyc_'). You may need to enter your home WiFi credentials (2.4G/5G band). Ensure correct password entry.
3. Binding Device: Once connected, give the device a name in the app. Upon successful binding, the device will appear in "My Equipment".

Note: If the 'yjyc_' WiFi is not visible, unplug the device, wait 10 seconds, then press and hold the button while plugging it back in.

Device Control Page

The device control page displays:

• Cat litter volume: Indicates the remaining proportion of cat litter.
• Bin Bin: Shows the used space in the waste bin.
• Mode: Displays the current operating mode (automatic, manual, night).
• Status: Shows the device's current state (standby, cleaning, pause, resetting, etc.).

Available functions via buttons/app:

• Reset: Resets the drum to its initial position, useful if it's not aligned or after adding litter. Ensure no cat is nearby before resetting.
• Clean up: Separates feces and litter within the drum.
• Clearance: Clears all waste and litter from the drum into the storage drawer, typically used when replacing litter.
• Deodorization: Activates the ozone sterilization and deodorization function for approximately 1 minute.

Access notifications and logs via the message icon ✉️, and device settings via the settings icon ⚙️.

Device Settings Page

The settings page allows configuration of:

• Device Name: Modify the device's name.
• Automatic Mode: Enable/disable automatic cleaning after the cat uses the toilet.
• Waiting Time: Set the delay (in seconds) before cleaning starts after the cat leaves. A 30-second delay is recommended.
• Sleep Time: Define a period during which the device will not perform automatic cleaning.
• Cat Litter Weight: Input the weight of 6L of cat litter to help the device calculate remaining litter.
• Notification Settings: Enable/disable push notifications from the device.
• Device Sharing: Share device access with other users via their app accounts.

4.2 Add Cat Litter

Supported Cat Litter Types:

• Bean curd sand compatibility: Supports strip pure bean curd sand, mixed bean curd sand, and granular sands like bentonite and millet sand.

Recommended Litter: "Monicoli" or "A pet" mixed cat litter and sodium-based litter are recommended for their deodorizing and agglomeration properties.

Add cat litter through the drum door when the equipment is not running or cleaning. The maximum capacity is 6 L. Exceeding this may affect performance.

After adding litter, restart the device (unplug for 15 seconds, then plug in) or use the reset button in the app. Failure to do so may delay litter data updates and automatic cleaning.

4.3 Mode of Operation

The HM-CATBOX offers three operating modes, configurable via the app:

• Automatic Mode: The default mode. The device automatically cleans after detecting the cat has finished. Cleaning is triggered after a set delay (e.g., 30 seconds).
• Sleep Patterns: When enabled, automatic cleaning is suspended during the set sleep time. Manual cleaning is still possible.
• Manual Mode: The device does not automatically detect or clean. Cleaning must be initiated manually via the device button or app. This mode is for users who prefer manual control.

Note: To enable Sleep Mode, Automatic Mode must be active. If both Automatic Mode and Sleep Time are off, the device operates in Manual Mode.

Manual cleanup can be performed at any time using the device button or the app's "Clean up" function.

In automatic mode, the device provides reminders for low litter, full waste bin, or other abnormalities via the app.

4.4 Clearance Function

The clearance function allows for easy replacement of cat litter. It cleans all litter from the drum into the storage drawer.

To initiate clearance, press and hold the device button for over 7 seconds until a beep is heard, or use the "Clearance" button in the app.

Important:

• Ensure the storage drawer has sufficient space before clearance.
• Do not unplug the power during the clearance process.
• Do not interrupt the operation.
• Observe the entire process.
• You can stop the task by pressing the device button if the drum is at the bottom. Use the provided brush for further cleaning if needed, then press the button again or continue via the app.

4.5 Protection Mechanisms

The HM-CATBOX features automatic protection. The specific functions vary by mode:

Protection Notes:

• During cleaning or clearance, if a cat enters the basin, the device will stop and resume after a period.
• If an exception occurs during automatic cleaning, pressing the button or device shell can suspend operation. The device will resume or return to its initial position.

4.6 Skills

Useful tips for operating the device:

• Press the device button for 3-5 seconds for cleanup.
• Press the device button for 6-10 seconds for clearance.
• Press the device button to pause cleaning/clearing. The device will resume or return to normal if no further action is taken.

4.7 Spare Parts Removal

The drum bin and storage drawer can be removed for cleaning.

Storage Drawer Cleaning: Remove and clean the drawer. Ensure it is dry before reinserting. Use clean water and mild household detergents. Avoid strong corrosive detergents.

Drum Cleaning:

1. Press the upper cover buckles on both sides and remove the upper cover.
2. Lift the drum forward slightly and remove it.
3. Clean the drum bin with clean water and mild detergents. Ensure it is dry before reinstallation.

Before operating the equipment, ensure all accessories are correctly installed to maintain functionality.

5 Troubleshooting

Regulatory Information

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) it may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with Class B digital device limits, providing reasonable protection against harmful interference in residential installations. It generates, uses, and radiates radio frequency energy. If interference occurs, users are encouraged to reorient the antenna, increase separation between equipment and receiver, connect to a different circuit, or consult a technician. Any unauthorized modifications may void the user's authority to operate the equipment. This equipment complies with FCC radiation exposure limits for uncontrolled environments and must not be co-located or operated with any other antenna or transmitter. Maintain a minimum distance of 20cm between the radiator and your body.

IC Statement

This device complies with Industry Canada's license-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause interference; and (2) this device must accept any interference, including interference that may cause undesired operation. (French: Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. L'environnement du millipascal incontrôlés, leurs conditions normales d'utilisation de maintenir, à moins 20cm avec les utilisateurs.)

Thank you for your support. For any issues during use, please contact us. We offer a 1-year warranty.