L207344 Lamp Assembly Instructions
Important Safety Notice
Read Carefully Before Beginning Assembly!
- Suitable for indoor use (25°C).
- Always use proper tools.
- Follow assembly steps in order. Do not skip any steps.
- Check all packing materials carefully for small parts that may have come loose. If parts are missing, contact the retailer from which you purchased the product to obtain any missing parts. DO NOT USE SUBSTITUTE PARTS.
- Periodically check to ensure that all connectors (bolts, screws, etc.) are tight.
- Keep these instructions for future reference.
- Assemblies involving glass or mirrors require extreme caution. Handle glass and mirrors carefully, as severe injury may result if they break. Never handle large pieces of glass or mirrors alone.
- When assembling products with electric cords (lamps, lights, etc.), always ensure (1) the electrical cord is unplugged before assembly and (2) be careful not to twist the electrical cord during assembly.
- When assembling shelves or entertainment centers, use a step ladder; do not stand on lower shelves to assemble upper shelves.
- Do not stand on tables, including end tables, coffee tables, and dinner tables, as they are not designed to support a person's weight.
- If assembly instructions state that the assembly requires two or more people, do not attempt by yourself as there is a risk of injury.
- The external flexible cable or cord of this luminaire cannot be replaced. If the cord is damaged, the furniture shall be destroyed.
NOTE: ASHLEY FURNITURE INDUSTRIES, LLC DISCLAIMS ANY LIABILITY FOR DAMAGES OR INJURIES WHICH MAY OCCUR DUE TO FAILURE TO PROPERLY FOLLOW ASSEMBLY INSTRUCTIONS, PROPERLY ASSEMBLE THE PRODUCT, OR PROPERLY USE THE PRODUCT.
NOTE: YOUR UNIT MAY LOOK DIFFERENT IN APPEARANCE FROM THE ONE SHOWN IN THE ILLUSTRATIONS ON THIS INSTRUCTION SHEET.
This document also contains important safety notices in Spanish, French, and Chinese.
Assembly Steps
Step 1: Prepare Components
The first step involves preparing the components. This includes the lamp base, a clear plastic washer, a finial, and a hardware pack. The clear plastic washer is crucial for holding the finial straight and should not be discarded.
- 1x Lamp Base
- 1x Finial
- 1x Clear Plastic Washer
- 1x [Hardware Pack]
Step 2: Attach Shade and Finial
In the second step, the lamp shade is attached to the lamp base. The finial is then screwed on top to secure the shade.
Step 3: Completed Assembly
The third step shows the fully assembled lamp.
If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
Replacement Parts and Contact Information
Replacement Parts
- 1x Lamp Base
- 1x Finial
- 1x Clear Plastic Washer
- 1x [Hardware Pack]
Contact Information
For replacement parts, please contact:
- Email: RTAParts@ashleyfurniture.com
- Website: www.ashleyfurniture.parts
- Phone: 1-844-966-0809 ?





