Logitech G435 Wireless Gaming Headset Setup Guide
This manual provides instructions for setting up and using the Logitech G435 wireless gaming headset.
Connectivity Options
LIGHTSPEED Connection
Connect your G435 headset to your PC, Mac, PlayStation 5, or PlayStation 4 using the LIGHTSPEED Wireless Technology.
- Insert the USB receiver into a USB port on your device.
- Press and hold the Power button for a minimum of 1.5 seconds. The LED will turn cyan once connected.
Bluetooth Connection
- Press and hold the Power and Mute buttons for 3 seconds or longer. The LED will flash blue as it enters pairing mode.
- Connect to your preferred device. The G435 can connect to a single Bluetooth device at a time.
Switching Between LIGHTSPEED and Bluetooth
- Press and hold the Mute button for 3 seconds or longer.
- Switching to LIGHTSPEED: The LED will light cyan for 5 seconds.
- Switching to Bluetooth: The LED will light blue for 5 seconds.
Power Management
Powering On and Off
- Power ON: Press the Power button for 1.5 seconds when the headset is OFF.
- Power OFF: Press the Power button for 3 seconds when the headset is ON.
- Auto Shutoff: The headset will automatically shut off after 30 minutes of inactivity.
Audio and Microphone Controls
Mute/Unmute Microphone
- Short press the Mute button to mute or unmute the microphone.
Setting Maximum Volume
- Set to 100 dB: Press and hold the Mute button and Volume UP button for 3 seconds. The LED will flash orange 3 times.
- Set to 85 dB: Press and hold the Mute button and Volume DOWN button for 3 seconds. The LED will turn solid orange for 5 seconds.
Sidetone Functionality
Sidetone allows you to hear your own voice while communicating, mimicking a phone call experience and enabling you to adjust your speaking volume.
- Enable Sidetone: Double press the Mute button. The LED will flash orange twice.
- Disable Sidetone: Double press the Mute button. The LED will flash orange once.
- Adjust Sidetone:
- UP: Single press the Mute button + Volume UP.
- DOWN: Single press the Mute button + Volume DOWN.
Battery Status
Checking Battery Level
- Single press the Power button when the headset is ON.
- Battery 31% to 100%: The LED will show green for 5 seconds.
- Battery 15% to 30%: The LED will show red for 5 seconds.
- Battery <15%: The LED will flash red for 5 seconds.
Spare Parts and Recycling
Spare Parts
- Earpads
- Wireless USB Receiver
- Charging Cable
Recycling Information
Logitech encourages the resale or donation of working products. Batteries, electronic, and electrical equipment should not be disposed of with household waste. Wherever possible, they should be segregated and brought to an appropriate collection point for recycling to minimize environmental and human health impacts. For more information, contact your local authorities or place of purchase, or visit www.logitech.com/recycling.
Questions?
For support, visit logitechG.com/support/G435.
Battery Removal Instructions
Follow these steps to remove the battery:
- Gently pry off the earpad.
- Unscrew the indicated screws to access the battery compartment.
- Carefully disconnect and remove the battery.