Picun F1 Wireless Noise-Canceling Headphones User Manual
Material: 70g writing paper, double-sided single black printing. Size: 73x105mm.
Headphone LED Indicator
| Status | LED Description |
|---|---|
| Power On | Blue LED stays on continuously and enters pairing mode |
| Pairing Mode | Red/blue LEDs flash alternately |
| Noise Cancelling Mode | Noise cancelling on (green LED lights up), noise cancelling off (green LED goes off) |
| Standby Mode | Blue LED stays on continuously |
| Low Battery Status | Red LED flashes 3 times every 5 seconds |
| Charging Mode | Charging - red LED lights up, fully charged - red LED goes off |
Outline and Functions of Headphone Appearance
Diagram showing the headphones with numbered parts:
- 1: Noise Cancellation Switch
- 2: Call Microphone [?]
- 3: USB-C Charging Port [?]
- 4: 3.5mm Audio Port [?]
- 5: Volume Up / Next Track button [⬆️]
- 6: Volume Down / Previous Track button [⬇️]
- 7: Play / Pause Button [▶️]
- 8: BT Indicator / Noise Cancellation Indicator
Basic Operation of BT Earphones
Power On
Long press the Play/Pause button [▶️] for 3 seconds. The blue light will stay on for 3 seconds, and then the earphones will turn on. After turning on, it will automatically enter pairing mode. The BT indicator will flash red/blue alternately.
Power Off
Long press the Play/Pause button [▶️] for 3 seconds. The red light will stay on for 3 seconds and then turn off. The earphones will shut down.
BT Connection Mode
After turning on, the headphones enter BT pairing mode, and the BT indicator light flashes red/blue alternately. Turn on the BT function of your mobile phone, search for the device name "picun F1", and click on the device name to connect. Once connected successfully, the blue light will stay on, and during music playback, the blue light will flash slowly.
Volume Adjustment
Short press/Long press the Volume Up button [⬆️] for 1 second to increase the volume. Short press/Long press the Volume Down button [⬇️] for 1 second to decrease the volume.
Song Selection
Short press/long press the Volume Up button [⬆️] to skip to the next track. Short press/long press the Volume Down button [⬇️] to skip to the previous track.
Play/Pause/Answer Call
- When music is playing, short press the Play/Pause button [▶️] to pause the music.
- When music is paused, short press the Play/Pause button [▶️] to resume playing music.
- When a call comes in, short press the Play/Pause button [▶️] to answer the call.
- During a call, short press the Play/Pause button [▶️] to hang up the current call.
- When a call comes in, long press the Play/Pause button [▶️] to decline the call.
Two-Device Connection Method
- While the headphones are on, press and hold the power button [▶️] for 3 seconds to put them into pairing mode, then connect to the first mobile phone.
- Turn off the BT function of the first connected mobile phone to put the headphones into pairing mode, then connect to the second mobile phone.
- Turn on the BT function of the first mobile phone and manually connect to the headphones.
Automatic Power Off and Reconnection at a Distance
If the headphones are out of range, they will disconnect. If you return within BT range within 5 minutes, the headphones will automatically reconnect. If you don't return within 5 minutes, the headphones will automatically power off.
Noise Cancelling Mode
With BT enabled, short press the ANC button to activate active noise cancelling, and short press again to deactivate noise cancelling function.
With BT disabled, long press the ANC button to activate active noise cancelling, and long press again to deactivate noise cancelling function.
Low Latency Function
In any powered-on mode, triple press the ANC button to enter low latency mode. The headphones will emit two "ding-ding" sounds. Triple press again to exit low latency mode, and the headphones will emit a single "ding" sound. (Pairing status and call status not supported)
Voice Assistant Function
In non-call status, triple press the power button [▶️] to activate the voice assistant function.
Battery Capacity Status
When headphones are connected to an iOS device, the current headphone battery status will be displayed on the iOS device's screen in the top right corner.
Headphone Charging
When battery level is low, please charge the headphones for about 3 hours using the USB charging cable [?]. The headphones will automatically power off during charging. During charging, the red indicator light will stay on, and when fully charged, the red light will turn off.
Clear Pairing Information
In non-call status, simultaneously long press the Volume Up [+] and Volume Down [-] buttons for 3 seconds.
Line-in Mode
Inserting the audio cable [?] will automatically power off the headphones.
Note: 1. In Line-in mode, BT and noise cancelling functions cannot be used. 2. To use BT, power on the headphones again after removing the audio cable.
Specifications and Accessories
Specifications
| Parameter | Value |
|---|---|
| BT Protocol | A2DP/AVRCP/HFP/HSP |
| Reception Distance | 10m |
| Speaker Size | 40mm |
| Frequency Response | 20HZ-20kHZ |
| Speaker Sensitivity | 122±3dB |
| Speaker Impedance | 32Ω±15% |
| Microphone Sensitivity | -42dB±3dB |
| Working Current | 10-30mA |
| Charging Voltage | 5V |
Packaging Accessories
- 1. BT Headphones
- 2. Charging Cable [?]
- 3. Audio Cable [?]
- 4. User Manual
