User Manual for UNBRANDED models including: PT23, 2A54D-PT23, 2A54DPT23, PT23 Bluetooth Pedal Multimedia Controller, Bluetooth Pedal Multimedia Controller, Pedal Multimedia Controller, Multimedia Controller, Controller

PT23 User Manual V1.2

admin

15 PT23 UserMan-US

SHENZHEN RDING TECH CO.,LIMITED PT23 Multimedia remote control 2A54D-PT23 2A54DPT23 pt23

PDF preview unavailable. Download the PDF instead.

GetApplicationAttachment.html?id=6326358
. Product picture:

PT23 User Manual

. Description:
PT23 is a powerful Bluetooth pedal multimedia controller, which can be used to browse electronic music, e-books, PPT, pictures, and other short video apps such as TikTok. Supports Android, IOS, HarmonyOS, Windows and other operating systems.
. Parameter:
1.Product name: Multimedia remote control 2.Product mode: PT23 3.Bluetooth coverage radius: 10m 4.Bluetooth version: Bluetooth 5.3 5.Battery: Built-in rechargeable lithium battery 6.Battery capacity: 230mAh 7.Product size: 55*52*30mm 8.Weight: 37g
. Function description:

Mode

Function

One press

Mode1 Simulate hand filp

Up

over,Turn up or Down

Mode2 Simulate hand filp

Left

over,Turn left or right

Mode3 Turn left or right

Left

Mode4 Turn up or down

Up

Double press Down
Right
Right Down

Press one and hold
Continue Up
Continue Left
Continue Left Continue Up

Double press and hold Continue Down Continue Right Continue Right Continue Down

1. ON/OFF: power switch; 2. Type-C: For battery charging; 3. connect: Click mode switch, press three seconds enter Bluetooth pairing; 4. LED: led on when charging, led off when full,Low power flashing.
.Instructions:
1. Turn the power switch to "ON" to start the machine. 2. Press connect key three seconds enter bluetooth pairing mode,find device "PT23" and click to connect. 3. Click "connect" key to swich modes.
Note: IOS systems need to open Settings>Accessibility>touch>turn on Assistive touch(adjust to one-third of the position) to use it properly.
WARNING: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. WARNING:The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. WARNING:The wireless connection distance of the product is 10 meters, beyond which normal use is not guaranteed. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one more of the following measures: · Increase the distance between the equipment and receiver. · Consult the dealer or an experienced radio/TV technician for help.


Microsoft: Print To PDF