realme

Greetings from realme mobile

This guide will show you how to use the phone and its important functions.

Phone Diagram: The front of the smartphone shows the Receiver, Front Camera, Proximity sensor & light sensor at the top. The side shows the Volume Key and the Power Key / Fingerprint Scanner.

Charging and Usage Notes

• When charging, please place the device in an environment that has a normal room temperature and good ventilation. It is recommended to charge the device in an environment with temperature ranging from 5°C~35°C.
• The back cover of the device cannot be removed.

How to reboot the phone

Press and hold the Power Button and Volume Up Button at the same time until the realme boot animation is displayed to reboot the phone.

How to Transfer Old Mobile Content to a New Mobile

You can use realme Clone Phone to easily transfer photos, videos, music, contacts, messages, apps, etc from your old phone to the new one.

For Android Phones:

1. If you have an old Android phone, first scan the QR code below, then download and install Clone Phone, next open Clone Phone on both the new and old phones, and follow the on-screen instructions to complete the operation.

Download Link: https://i.clonephone.coloros.com/download

For iPhones:

2. If you have an old iPhone, open Clone Phone on the new phone directly, and follow on-screen instructions to sign in to iCloud account and sync the files.

Install SIM and Memory card

Please turn off the phone before inserting the card.

This product is only compatible with Nano SIM on both slots of the SIM card holder.

Inserting non-standard cards can cause damage to the phone SIM card holder.

Keep the SIM Ejector Tool out of reach from children, to prevent accidental ingestion or impalement.

SIM Card Installation Steps:

1. Illustration showing the SIM tray slot on the side of the phone.
2. Illustration showing the SIM tray being ejected.
3. Illustration showing a SIM tray with two Nano SIM cards and a microSD card inserted.

⚠️ Warning

• Do not place the phone or battery near or inside heating equipments, cooking equipments, high pressure vessels (such as microwave ovens, induction cooker, electric oven, heater, pressure cooker, water heater, gas stove, etc.) to prevent the battery overheating which may lead to an explosion.
• The original charger, data cable and battery shall be used. Unapproved chargers, data cables, or batteries that are not certified by the manufacturer may result in electric shock, fire, explosion, or other hazards.

How to switch system languages

Go to Settings—System—Languages—System Languages. Select the corresponding language.

The device supports: English, Hindi & Nepali for inputting.

The device also supports: Assamese, Bengali, Gujarati, Hindi, Kannada, Kashmiri, Konkani, Malayalam, Manipuri, Marathi, Nepali, Oriya, Punjabi, Sanskrit, Sindhi, Tamil, Telugu, Urdu, Bodo, Santhali, Maithili, Dogri and English for readability.

Some content may differ from your device depending on the region, service provider, or software version, and is subject to change without prior notice.