BISSELL ProHeat 2x Revolution CleanShot Parts Diagram
Models: 2066F, 2457H
Product Overview
This document provides a detailed parts diagram for the BISSELL ProHeat 2x Revolution CleanShot carpet cleaner. It identifies individual components with numerical references, aiding in part identification and potential replacement.
Parts List
- 1: Hose and Handle Assembly (likely spray wand and trigger mechanism)
- 2: Seal or Gasket
- 3: Brush Roll Assembly (featuring multiple cleaning brushes)
- 4: Assorted Small Hardware (e.g., screws, clips)
- 5: Assorted Small Hardware (e.g., screws, clips)
- 6: Filter or Screen Assembly
- 7: Seal or Gasket
- 8: Internal Component Housing (likely for motor and pump systems)
- 9: Top Housing or Tank Connection Point
- 10: Clean Water Tank Assembly
- 11: Main Body or Housing of the Carpet Cleaner
- 12: Dirty Water Tank Lid or Cap
- 13: Dirty Water Tank Cap Seal
- 14: Handle and Control Assembly (includes telescoping wand and spray trigger)
- 15: Upper Housing or Handle Support Structure
- 16: Assorted Small Components (e.g., screws, fasteners)
- 17: Assorted Small Components (e.g., screws, fasteners)
- 18: Housing for Motor or Pump Assembly
- 19: Motor or Pump Assembly
- 20: Base Housing or Foot Assembly, including wheels
- 21: Wheel Assembly
- 22: Assorted Small Hardware (e.g., screws, clips)
