Instruction Manual for V-TAC models including: VT-61106, VT-61109, VT-61112, VT-61118, VT-611 Series LED Panel, VT-611 Series, LED Panel, Panel
1 day ago — INSTRUCTION MANUAL. LED PANEL. TECHNICAL DATA. In case of any query/issue with the product, please reach out to us at: support@v-tac.eu. For More products range ...
15 hours ago — INSTRUCTION MANUAL. LED PANEL. TECHNICAL DATA. In case of any query/issue with the product, please reach out to us at: support@v-tac.eu. For More products range ...
File Info : application/pdf, 2 Pages, 313.24KB
DocumentDocumentINSTRUCTION MANUAL LED PANEL TECHNICAL DATA MODEL VT-61106 SKU 6982 WATTS DIRECT CONNECT VOLTAGE BEAM ANGLE CRI OPERATION TEMPERATURE BODY TYPE DIMENSION 6W DC: 12-18V 120° >80 -20°C to +40° C Aluminium Ø120 x 12 mm CUT OUT SIZE Ø110 mm VT-61109 6983 9W DC: 24-48V 120° >80 -20°C to +40° C Aluminium Ø145 x 18 mm Ø133 mm VT-61112 6984 12W DC: 24-28V 120° >80 -20°C to +40° C Aluminium Ø170 x 12 mm Ø160 mm VT-61118 6985 18W DC:36-72V 120° >80 -20°C to +40° C Aluminium Ø225 x 12 mm Ø210 mm INTRODUCTION & WARRANTY Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only. In case of any query/issue with the product, please reach out to us at: support@v-tac.eu For More products range, inquiry please contact our distributor or nearest dealers. V-TAC EUROPE LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B MULTI-LANGUAGE MANUAL QR CODE Please scan the QR code to access the manual in multiple languages. WARNING 1. Please make sure to turn off the power before starting the installation. 2. Installation must be performed by a qualified electrician. 3. The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced. 4. For Indoor Use only This marking indicates that this product should not be disposed of with other household wastes. INSTALLATION DIAGRAM Luminaires not suitable for covering with thermally insulating material. Caution, risk of electric shock. CUTOUT TEMPLATE 1. Cut a hole as per the cutout size provided. 2. Connect the Live and Neutral wires. 3. Hold the two clips back against the panel light and push it into the hole. Allow the springs to pull the light up to the ceiling. 4. Switch ON the power and test.