RoadPro Family of Brands
User Manual for ROADKING models including: RKING1000, Noise-Canceling Mono Bluetooth Headset, RKING1000 Noise-Canceling Mono Bluetooth Headset
Mar 20, 2022 — Bluetooth Headset. User Manual ... between phone and the Bluetooth headset. ... A. Follow instructions on page 5 to connect first phone, then turn off the.
A. Bluetooth headset RKING1000 x 1 B. Micro USB charging cable x 1 C. User manual x 1 D. Car charger x 1 E. Sponge microphone cover x 1 F. Drawstring bag x 1
File Info : application/pdf, 10 Pages, 487.61KB
DocumentDocumentRKING1000 Noise-Canceling Mono Bluetooth® Headset User Manual - 1 - Contents: Product Overview ------------------------------------------------------------------ 3 Basic Operation -------------------------------------------------------------------- 4 Bluetooth Pairing and Connection --------------------------------------------- 5 Connection with Two Devices -------------------------------------------------- 6 LED Indicator ----------------------------------------------------------------------- 7 Charging ----------------------------------------------------------------------------- 8 Product Specifications ----------------------------------------------------------- 9 Notes and Q & A ------------------------------------------------------------------ 10 - 2 - Product Overview Package Contents: A. Bluetooth headset RKING1000 x 1 B. Micro USB charging cable x 1 C. User manual x 1 D. Car charger x 1 E. Sponge microphone cover x 1 F. Drawstring bag x 1 3 Basic Operation Button Function Power on Power off Enter pairing mode Play / Pause Redial a call MFB Reconnect Voice dial Operation Instructions When device is off, press and hold the MFB for 1-3 seconds to power on. When device is on, press and hold the MFB for 5 seconds to power off. When device is off, press and hold the MFB for 5-8 seconds to enter into pairing mode. When under disconnected standby mode, double-click the MFB to enter into pairing mode. Short click the MFB when listening to music. Double-click the MFB to dial the last number called. If you have paired before, powering on should enter into reconnected state. If it doesn't reconnect automatically, short click the MFB to reconnect under pairing mode. Hold down the MFB for 1 second, then release. Audio switch Hold down the MFB for 1 second to switch the audio between phone and the Bluetooth headset. Volume + Volume - Answer a call End a call Reject a call Volume up Next song Volume down Previous song When receiving a call, short click the MFB to answer. To end a call, short click the MFB. To decline an incoming call, hold down the MFB for 1 second. Short click the Volume + button to increase volume. Hold down the Volume + button to skip to the next song. Short click the Volume - button to decrease volume. Hold down the Volume - button to go back to the previous song. 4 Bluetooth Pairing and Connection A. When device is off, press and hold the Multi-Function Button (MFB) for 5-8 seconds to enter into pairing mode. The blue & red lights should alternate flashing. B. Search and click "RK1000" to connect the headset to your phone's Bluetooth. Once connected, the blue LED light will flash and you can now play music from your phone to the headset. C. You can press the MFB and Volume +/- on the Bluetooth headset to control calls and music. 5 Connection with Two Devices A. Follow instructions on page 5 to connect first phone, then turn off the Bluetooth function on the first phone. B. Double-click the MFB to enter into pairing mode again, you'll see the red & blue LED lights flash alternately. C. Search and click "RK1000" on the second phone's Bluetooth list. The LED will flash blue once connected. D. Turn the first phone's Bluetooth back on and reconnect to "RK1000". The headset will now be connected to two phones. Note: Music can only be played from one phone at a time. When you want to play music from the other phone, you will need to pause or close the music of the previous phone. The same applies during talking status. 6 LED Indicator Mode Power on Power off Pairing mode Disconnected standby mode Connected standby mode Playing music Talking Delete paired record Charging Full charge Low battery LED Indicator The blue LED light flashes for 1 second The red LED light flashes for 1 second The red & blue LED lights flash alternately The blue LED light flashes once every 2 seconds The blue LED light flashes once every 5 seconds The blue LED light flashes once every 5 seconds The blue LED light flashes once every 5 seconds The red & blue LED lights flash once at the same time Solid red LED light Solid blue LED light The red LED light flashes 7 Charging Please charge the RKING1000 at once when the red LED flashes. Charging time is approximately two hours. Solid LED red will change to solid LED blue when fully charged. Charge Connections Please connect to the RKING1000 charging port through the Micro USB charging cable. The charger can be used as a car charger, travel charger, computer USB, etc. Note: 1. Charge the RKING1000 at least once every two months when not in use. 8 Product Specifications Bluetooth Version Bluetooth Chipset Operation Range Bluetooth Protocols CODEC Code Battery Capacity Charging Time Stand by Time Bluetooth V5.0 CSR 8615 Up to 32 feet HSP HFP A2DP AVRCP SBC 180maH/3.7V 2 hours 200 hours Working Time About 14 hours @ 50% volume Headset Net Weight .11 lbs Headset Dimension 6.42 " x 5.60" x 1.9" Actual use time will differ depending on environment and music. 9 Notes and Q & A A. How to reconnect and operate when connection fails? When RKING1000 connects to your phone successfully the first time, it will search and reconnect to the paired device automatically going forward. If it fails to connect, repair the phone to reconnect. B. How to delete paired records? When powered on, press and hold the Volume + and - buttons for 5 seconds to clear the pairing record. The blue and red indicator lights will flash once at the same time indicating the record has been cleared. Try clearing the records when experiencing a connection problem. C. What is the password for pairing? Some devices require a password for pairing. Please try 0000, 8888, 1111, or 1234. D. What device can charge the headset? Any car charger, power bank, PC etc. that has a DC 5V, charging current more than 500mA will charge the headset. E. Three-way calling function operation? When receiving an incoming call, while already on a call... 1. Short click the MFB to answer the new call and end the current call. 2. Double-click the MFB to answer the new call and keep the current call on hold. 3. Click and hold the MFB for 1 second to reject the incoming call. When on a three-way call, double-click the MFB to switch audio between the current call and call on hold. ONE-YEAR LIMITED WARRANTY For support, product and warranty information, please visit www.roadprobrands.com RoadKing® and RoadPro® are registered trademarks owned by DAS Brands, LLC and its affiliated companies. The BLUETOOTH® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by DAS Companies, Inc. is under license. All other trademarks, registered trademarks, copyrights and logos are the property of their respective owners. ©2022 DAS Companies, Inc. and/or affiliates. 10