ArmorAll Premium 1080P Dual Dash Camera

Product Overview

A front view of the ArmorAll Premium 1080P Dual Dash Camera is shown. It features a prominent front-facing lens at the top, a large LCD screen below it, and the ArmorAll logo on the lower right bezel. The device is mounted on a suction cup.

Operating Instructions

1. Power Device

This device requires a constant power source. Connect the dash cam using the included mini USB cable, plugging the mini port into the dash cam and the USB-A port into a car charger (not included).

2. Accessing the Menu

To access the menu/settings, long press the menu button on the recording screen while the device is NOT recording. Use the Forward (5) and Back (3) buttons to scroll through options.

3. Turn on/off dash cam

Once connected to the car charger, the dash cam will automatically turn on with the car. If not connected to a car charger: Hold the Power button to turn the dash cam on. Hold the Power button again to turn it off.

4. Mode Selection

With the camera on, press the Menu/Mode button to cycle through modes: Video, Photo, Playback. This function is not available while recording.

5. Video Recording

When connected to the car charger with a memory card inserted, the dash cam automatically starts video recording when the car starts and stops when the ignition is turned off. If not connected to a car charger, turn on the dash cam and press the OK button to start recording. Press OK or Power button again to stop. Press the Forward button (5) to cycle through front and rear lens display settings. Press the Back button (3) to toggle the microphone on and off.

6. Photos

Hold the Menu/Mode button to switch to photo mode. Press the OK button to take a photo and save it to the memory card. Press the Forward button (5) to select front or rear lens.

7. Changing Camera Front to Rear

Press the Forward button (5) to cycle through front and rear lens display settings.

8. Video/Photo Settings

In video mode, hold the Menu/Mode button to open video settings. Use the Forward and Back buttons to cycle through settings. Press the OK button to select. Press the Menu/Mode button again to exit video settings.

9. Playback

Press the Menu/Mode button and switch to playback mode. Press the Forward or Back button to cycle through pictures and/or videos. Press the OK button to playback selected videos. Hold the Menu/Mode button in playback mode for settings like deleting or locking photos and videos.

Note: This device is not to be used as a security monitoring device. This device will hold a brief charge; a constant power source is recommended while in use. Some functions are limited when not connected to a power source.

Specifications

One Year Warranty

Armor All warrants its products for ONE YEAR against defects in manufacturing under regular consumer use with original receipt of retail purchase.

Armor All believes in its products and wants to provide replacements if needed, provided the problem is reported while the product is still under warranty. If a defect covered by this warranty is discovered, please contact Armor All to receive a replacement. Proof of the retailer's receipt is required to utilize the product's warranty.

Customers outside of the U.S. will be responsible for shipping and handling charges if a replacement is required that is not due to a manufacturing defect.

Armor All's warranty is limited to its products only. The warranty does not cover the replacement or repair cost of any third-party accessory, electronic device, or personal property.

For instructions on how to obtain warranty service for your product, please contact Customer Service at info@armorallelectronics.com.